/*
  Demo of the audio sweep function.
  The user specifies the amplitude,
  start and end frequencies (which can sweep up or down)
  and the length of time of the sweep.

  Modified to eliminate the single DAC on the Teensy 3.2 and the first DAC on
  the Teensy 3.5 or 3.6.  The Teensy 4.0 does not have a DAC.

  Pins:		Teensy LC	Teensy 3.2	Teensy 3.5/3.6

  DAC:		A12		A14		A21
  */

#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SD.h>
#include <SerialFlash.h>

// Define USE_PROPSHIELD if the Teensy uses the prop shield, and we want to
// enable the onboard amplifier.  Assume the LC/3.2 will have the propshield,
// but the 3.5/3.6 won't.

#if defined(__MKL26Z64__) || defined(__MK20DX256__)
#define USE_PROPSHIELD		1
#endif

// GUItool: begin automatically generated code (edited by meissner afterwards).
AudioSynthToneSweep	tonesweep;		//xy=102,174
AudioAmplifier		amp;			//xy=324,172
AudioOutputAnalog	dac;			//xy=452,189

AudioConnection		patchCord1 (tonesweep, amp);
AudioConnection		patchCord2 (amp,       0,   dac, 0);
// GUItool: end automatically generated code

const float		t_ampx	= 0.8;
const int		t_lox	= 10;
const int		t_hix	= 22000;
const float		t_timex	= 10;		// Length of time for the sweep in seconds

void setup(void)
{
  // Wait for at least 3 seconds for the USB serial connection
  Serial.begin (9600);
  while (!Serial && millis () < 3000)
    ;

  AudioMemory (8);
  amp.gain (0.5f);

  // Enable the prop shield speaker
#if USE_PROPSHIELD
  pinMode (5, OUTPUT);
  digitalWrite (5, HIGH);
#endif

  Serial.println("setup done");

  if (!tonesweep.play (t_ampx, t_lox, t_hix, t_timex)) {
    Serial.println ("ToneSweep - play failed");
    while (1)
      ;
  }

  // wait for the sweep to end
  Serial.println ("Tonesweep up started");
  while (tonesweep.isPlaying ())
    ;

  // and now reverse the sweep
  Serial.println ("Tonesweep down started");
  if (!tonesweep.play (t_ampx, t_hix, t_lox, t_timex)) {
    Serial.println("ToneSweep - play failed");
    while (1)
      ;
  }

  // wait for the sweep to end
  while (tonesweep.isPlaying ())
    ;
  Serial.println("Done");
}

void loop(void)
{
}