Making the Electronics High Voltage Parts - TechforTrade/Thunderhead-Filament-Extruder GitHub Wiki
This page describes how you might make the parts for the Electronics - High Voltage. Keep in mind that there are probably many other methods that will work. Choose a method that works for you. If a particular part requires an expensive tool you don't have, consider having a friend or local machine shop do it for you. If you have any recomendations, tips or questions, please don't hesitate to contact us. - Thanks
| Item No. | Image | Name |
|---|---|---|
| 1 |  |
Center Punch |
| 2 |  |
Cold Chisel |
| 3 |  |
Combination Square |
| 4 |  |
Drill Bit - 4mm |
| 5 | |
Drill Bit 3-8 in |
| 6 |  |
Step Drill Bit |
| 7 |  |
Drill Press |
| 8 |  |
Tape Measure |
| 9 |  |
Scriber |
| 10 |  |
Sheet Metal Brake |
| 11 |  |
Spot Welder |
| 12 |  |
Hammer |
| Item No. | Image | Name |
|---|---|---|
| 1 | |
Center Punch |
| 2 | |
Combination Square |
| 3 | |
Drill Bit 3 mm |
| 4 | |
Spot Welder |
| 5 | |
Sheet Metal Brake |
| 6 |  |
Tin Snips |
| 7 | |
Scriber |
- By Allant - Own work, CC BY-SA 3.0, Link
- By No machine-readable author provided. Graibeard assumed (based on copyright claims). [GFDL, CC-BY-SA-3.0 or CC BY-SA 2.5 ], via Wikimedia Commons
- By Satrughna02 - Own work, <a href="https://creativecommons.org/licenses/by-sa/3.0" title="Creative Commons Attribution-Share
- Twist Drill Bit by andersen_mrjh https://www.flickr.com/photos/75793838@N08/6954963717
- None
- By Sönke Kraft aka Arnulf zu Linden [GFDL or CC BY-SA 3.0 ], from Wikimedia Commons
- By 19Tarrestnom65 - Own work, CC BY-SA 4.0, Link
- Matt Rogge
- Photograph taken by Triddle [Copyrighted free use]
- By Ricce [Public domain], from Wikimedia Commons
