Electronics Low Voltage - TechforTrade/Thunderhead-Filament-Extruder GitHub Wiki

Electronics - Low Voltage

Bill of Materials

* Denotes that the item is included in the kit.

Image Name Description Source Files Qty
Base Plate - Low V Electronics Base Plate - Low V Electronics Made step, drawing 1
Face Plate - Low V Electronics Face Plate - Low V Electronics Made step, drawing 1
Thunderboard Thunderboard Made step 1
Arduino Mega Mount Back Arduino Mega Mount Back Printed stl, step 1
Arduino Mega Mount Front Arduino Mega Mount Front Printed stl, step 1
Arduino Mega Mount Retainer Arduino Mega Mount Retainer Printed stl, step 1
LCD Spacers LCD Spacers Printed stl, step 6
ArduinoMega ArduinoMega Purchased step 1
Keypad-16KeyMembrane Keypad-16KeyMembrane Purchased step 1
LCD 2004 LCD 2004 Purchased step 1
Nut M3 Nut M3 Purchased step 17
Pololu A4988 Pololu A4988 Purchased step 1
Socket Cap Screw M3 by 16 mm long Socket Cap Screw M3 by 16 mm long Purchased step 10
Socket Cap Screw M3 by 35 mm Long Socket Cap Screw M3 by 35 mm Long Purchased step 8
Stepper Driver Break Out Board Stepper Driver Break Out Board Purchased step 1
Washer M3 Washer M3 Purchased step 37
Wire Clamp Wire Clamp Purchased step 2

Tools needed for assembly

Item No. Image Name
1 Allen Key 2.5 mm Allen Key 2.5 mm
2 Wrench 5.5 mm Wrench 5.5 mm

Making The Parts

Go to Making the Electronics - Low Voltage Parts for information on how to build the following parts:

  • Base Plate - Low V Electronics
  • Face Plate - Low V Electronics
  • Thunderboard

Assembly

Attributions for images used on this page

⚠️ **GitHub.com Fallback** ⚠️