Electronics High Voltage - TechforTrade/Thunderhead-Filament-Extruder GitHub Wiki

---

* Denotes that the item is included in the kit.

Image	Name	Description	Source	Files	Qty
	High V Electronics Enclosure Base		Made	step, drawing	1
	High V Electronics Enclosure Top		Made	step, drawing	1
	Fan 60mm		Purchased	step	1
	Fan protection grill 55023 - 60mm X 60mm*		Purchased	step	1
	Fuse Holder*		Purchased	step	1
	Hex bolt 1-4 in by 1-1-2 in long		Purchased	step	4
	Nut 1-4 in		Purchased	step	4
	Nut M3		Purchased	step	4
	Nut M4		Purchased	step	8
	Power Supply 12V 30A*		Purchased	step	1
	Sheet Metal Screw no 6 1-2 in long		Purchased	step	8
	Socket Cap Screw M3 by 25 mm long		Purchased	step	4
	Socket Cap Screw M4 by 10mm		Purchased	step	8
	Socket Cap Screw M4 by 12mm		Purchased	step	4
	SSR 10A*		Purchased	step	2
	Stepper Driver DQ2722MA*		Purchased	step	1
	switch*		Purchased	step	1
	Washer 1-4 in		Purchased	step	8
	Washer M3		Purchased	step	8
	Washer M4		Purchased	step	20
	Wire Clamp		Purchased	step	3

Item No.	Image	Name
1		Allen Key 2.5 mm
2		Allen Key 3 mm
3		Screwdriver Phillips
4		Soldering Iron
5		Wrench 5.5 mm
6		Wrench 7-16 in
7		Wrench 7mm

Go to Making the Electronics - High Voltage Parts for information on how to build the following parts:

• High V Electronics Enclosure Base
• High V Electronics Enclosure Top

---

• By Benjamint444 - Own work, CC BY-SA 3.0, Link
• By Benjamint444 - Own work, CC BY-SA 3.0, Link
• By The original uploader was SCEhardt at Wikipedia. (Derived from w:File:Schraubenzieher.jpg) [Public domain], via Wikimedia Commons
• By © Benoît Prieur / Wikimedia Commons, CC BY-SA 4.0, Link