Augment Detector - TeamOpenIndustry/ImmersiveRailroading GitHub Wiki

The Detector Augment is used to check what locomotive/stock is passing overhead. Right click on a track segment to apply the augment. Like any augment, it may be removed from the track by right-clicking with the wrench. It can be filtered by right clicking on the augment with a locomotive or rolling stock item.

Right clicking on the augment with a redstone torch in your hand will switch it between a few modes:

• Stock: Outputs a signal of 15 if there's a stock on the detector and it matches the filter (if set), otherwise outputs no signal (this is the default mode).
• Speed: Outputs a signal with strength equal to floor(speed_in_kmh / 10) of the stock on the detector if it matches the filter (if set), otherwise outputs no signal.
• Number of passengers: Outputs a signal with strength equal to the min(15, number_of_passengers_riding) the stock on the detector if it matches the filter (if set), otherwise outputs no signal.
• Freight Cargo Fullness: Outputs a signal with strength proportional to the number_of_non_empty_item_slots / total_number_of_item_slots of the stock on the detector if it matches the filter (if set), otherwise outputs no signal.
• Liquid Cargo Fullness: Outputs a signal with strength proportional to the amount_of_fluid / max_amount_of_fluid of the stock on the detector if it matches the filter (if set), otherwise outputs no signal.