Assembly - TeacherFX/Data-Logger GitHub Wiki
Please watch this video for tips on how to solder PCBs with through-hole components:
https://www.youtube.com/watch?v=AqvHogekDI4
1 - Solder the Female pins headers onto all locations.
2 - Mount the sensors onto their labelled locations.
3 - Place the PCB inside the Enclosure so that the screw holes line up.
4 - Mark a line on the enclosure in the centre of the indented part of the PCB
5 - Drill a 18mm hole for the cable gland to fit into, insert cable gland and hand tighten
6 - Use hot glue gun to attach wooden stakes to the back of the enclosure so that the cable gland will be facing towards the ground
6 - Mount the sensors onto their labelled locations.
7 - Use the Male to Male electronic jumper cable to extend the Soil and Light sensors so they can be placed outside of the box
6 - Place PCB in the box and attach with screws