To assign interfaces input option 1

Do not configure VLANs now The WAN interface name should be changed to em0 The LAN interface name should be changed to em1 If prompted for an optional interface, just select "ENTER"

Set Interface IP address

Select Option 2

If you are setting up WAN

Do not use DHCP Enter 10.0.17.117 We are using a 24 bit subnet mask Our Upstream gateway is 10.0.17.2 WE are not using IPv6

If you are setting up LAN

Do not use DHCP The IP address is 10.0.5.2 We are using 24 bit subnet mask There is not an upstream LAN gateway No to any DHCP or HTTP