zh CN Logger Sample - Supergiovane/node-red-contrib-knx-ultimate GitHub Wiki
🌐 Language: EN | IT | DE | 简体中文
导航: 首页 概览: Changelog • 常见问题 • 安全 • 文档：语言栏 KNX 设备: 网关 • 设备 • 节点保护 其他 KNX 节点: 场景控制器 • 看门狗 • 日志节点 • 全局上下文 • 告警器 • 负载控制 • 查看器 • 自动响应 • HA 翻译器 HUE: Bridge • 灯 • 电池 • 按钮 • 接触 • 设备软件更新 • 光照传感器 • 运动 • 场景 • Tap Dial • 温度 • Zigbee 连接 示例: 日志 • Switch Light • Dimming • RGB color • RGBW color + White • Command a scene actuator • Datapoint 213.x 4x Setpoint • Datapoint 222.x 3x Setpoint • Datapoint 237.x DALI diags • Datapoint 2.x 1 bit proprity • Datapoint 22.x RCHH Status • Datetime to BUS • Read Status • Virtual Device • Subtype decoded • Alexa • Apple Homekit • Google Home • Switch on/off POE port of Unifi switch • Set configuration by msg • Scene Controller node • WatchDog node • Global Context node • Alerter node • Load control node • Viewer node • MySQL, InfluxDB, MQTT Sample
<img src =“ https://raw.githubusercontent.com/supergiovane/node-red-contrib-knx-ultimate/master/img/wiki/logger.png” width =“ 90％”>
复制此代码并将其粘贴到您的流中
<详细信息> <摘要>查看代码
根据您的设置调整节点，然后将路径设置为文件节点**。
[
{
"id": "b8e9e444.0af1f",
"type": "knxUltimateLogger",
"z": "9b496263.064388",
"server": "55dbcdcf.4aacdc",
"topic": "Logger",
"intervalCreateETSXML": "15",
"name": "",
"autoStartTimerCreateETSXML": true,
"maxRowsInETSXML": "0",
"x": 340,
"y": 200,
"wires": [
[
"d46f6877.010698"
]
]
},
{
"id": "d46f6877.010698",
"type": "file",
"z": "9b496263.064388",
"name": "",
"filename": "",
"appendNewline": true,
"createDir": false,
"overwriteFile": "true",
"encoding": "none",
"x": 530,
"y": 200,
"wires": [
[]
]
},
{
"id": "55dbcdcf.4aacdc",
"type": "knxUltimate-config",
"z": "",
"host": "224.0.23.12",
"port": "3671",
"physAddr": "15.15.22",
"suppressACKRequest": false,
"csv": "",
"KNXEthInterface": "en9",
"KNXEthInterfaceManuallyInput": "",
"statusDisplayLastUpdate": true,
"statusDisplayDeviceNameWhenALL": true,
"statusDisplayDataPoint": false,
"stopETSImportIfNoDatapoint": "stop",
"loglevel": "error",
"name": "Gateway",
"localEchoInTunneling": true
}
]</详细信息>
