Starting from 1.1.0.5-RC6 there is only 1 edit mode left to manage the waypoints and destinations.

General information

• A left click on the edit button will activate the edit mode, a right click will only show the lines and target points.
• If a mode is active, the state will stay active even if you switch the vehicle. Also this state will be saved in the user settings.
• If the record mode is active and you switch the vehicle, the recording will be stopped.
• Auto connecting waypoints which are created by mouse and LCTRL will only work in SP, not in MP or on a dedi server.
• If the option to show the waypoints above tractor is active, you can move, delete and create them only there and not on the ground.

Mouse and key actions

• Create a waypoint = press & keep LCTRL and then click LMB to create it, after creation release both
• Create a waypoint with a connection to the last created one = it's like creating a waypoint, but don't release LCTRL
• Select a waypoint = click LMB, the waypoint bubble will turn green
• Move a waypoint = catch waypoint bubble turned blue, keep RMB pressed to fetch and move it
• Delete a waypoint = catch waypoint bubble turned blue, press & keep LALT, then click LMB to delete it
• Connect two waypoints (green line = one way) = select the 1st waypoint, then click on the 2nd (with LMB)
• Connect two waypoints (blue line = two way) = if green line exists select the 2nd waypoint, then click the 1st (with LMB)
• Connect two waypoints (light blue line = backward) = press & keep LSHIFT, select the 1st waypoint, then click the 2nd (with LMB)
• Toggle showing waypoint bubbles = press RCTRL (is activated as default at every start = showing waypoint bubbles)

---

• LCTRL = Left CTRL key
• RCTRL = Right CTRL key
• LALT = Left ALT key
• RALT = Right ALT key or ALT GR
• LMB = Left mouse button
• RMB = Right mouse button
• LSHIFT = Left SHIFT
• RSHIFT = Right SHIFT