Print3r: Cura Legacy - Spiritdude/Print3r GitHub Wiki
Print3r supports CuraEngine 15.04 aka CuraEngine Legacy; it's easier to use on the command-line than the current CuraEngine.
Install
% git clone -b legacy https://github.com/Ultimaker/CuraEngine.git
% cd CuraEngine
% make
% sudo cp build/CuraEngine /usr/local/bin/CuraEngineLegacy
Usage
Use CuraEngine Legacy with --slicer=cura-legacy.
Slicer Specific Settings
- nozzleSize
- layerThickness
- initialLayerThickness
- filamentDiameter
- filamentFlow
- layer0extrusionWidth
- extrusionWidth
- insetCount
- downSkinCount
- upSkinCount
- skirtDistance
- skirtLineCount
- skirtMinLength
Retraction settings
- retractionAmount
- retractionAmountPrime
- retractionAmountExtruderSwitch
- retractionSpeed
- retractionMinimalDistance
- minimalExtrusionBeforeRetraction
- retractionZHop
- enableCombing
- enableOozeShield
- wipeTowerSize
- multiVolumeOverlap
Speed
- initialSpeedupLayers
- initialLayerSpeed
- printSpeed
- inset0Speed
- insetXSpeed
- moveSpeed
- fanFullOnLayerNr
Infill settings
- sparseInfillLineDistance
- infillOverlap
- infillSpeed
- infillPattern
- skinSpeed
- perimeterBeforeInfill
Support material
- supportType
- supportAngle
- supportEverywhere
- supportLineDistance
- supportXYDistance
- supportZDistance
- supportExtruder
Cool settings
- minimalLayerTime
- minimalFeedrate
- coolHeadLift
- fanSpeedMin
- fanSpeedMax
Raft settings
- raftMargin
- raftLineSpacing
- raftBaseThickness
- raftBaseLinewidth
- raftBaseSpeed
- raftInterfaceThickness
- raftInterfaceLinewidth
- raftInterfaceLineSpacing
- raftFanSpeed
- raftSurfaceThickness
- raftSurfaceLinewidth
- raftSurfaceLineSpacing
- raftSurfaceLayers
- raftSurfaceSpeed
- raftAirGap
- raftAirGapLayer0
Misc
- matrix
- objectPosition
- objectSink
- autoCenter
- fixHorrible
- spiralizeMode
- simpleMode
- gcodeFlavor