Flux Connectors - SonarSonic/Flux-Networks GitHub Wiki

  • All Flux Network Connectors share the same GUI.
  • Connectors can all have the following: Custom Name, Priority, Transfer Limit & Surge Mode.
  • The Flux Plug and Flux Point can also chunk load.
  • Connectors can only be opened by a Network Member, or the original placer of the tile.
  • Connectors automatically change to the color of the selected network.

Flux Plug

  • Used for Adding Energy to the network
  • You can add energy from all sides simultaneously.

Flux Point

  • Used to Remove Energy from the network
  • You can remove energy from all sides simultaneously.

Flux Storage

  • Used to Store Energy in the network
  • Flux Storage is used to store excess energy. It will only be filled once each Flux Point has received enough energy.
  • This energy can only be accessed by removing energy with a Flux Point.
  • Network's do not require a Flux Storage to operate

Flux Controller

  • Required to activate Cross-dimensional inventory charging.
  • Inventory charging can be configured in the Wireless Charging Tab.
  • Only one controller can be connected to a network at one time.
  • The controller's 'Output' refers to energy outputted from the network via Wireless Charging.
  • Network's do not require a Flux Controller to operate

Flux Configurator

  • The Flux Configurator can also be connected to a network.
  • It can be used to access, edit, delete networks on the go. And shares the same GUI as connectors.
  • It can also be used to copy / paste settings between connectors.

Copying Settings: Shift-Right Click on a connector to copy it's settings and then Right Click on a connector you wish to paste the settings to. If you right click something which isn't a connector you'll bring up the Network GUI and also you'll be able to edit the settings which the Configurator will paste. The configurator can also be renamed here, with the name field.

Admin Configurator

  • The Admin Configurator shares the same GUI as connectors.
  • It can't be crafted and can only be obtained in creative.
  • It has the ability to grant 'Super Admin' privileges. See Permission Levels
  • You can also use it to view a more "Detailed Network View" which shows, Average Tick Rate and the number of connectors in the Network Selection Tab.