• Accessing the Dashboard
  • Online Dashboard
  • Local Dashboard
  • Accessing a Specific Brand Management Dashboard
• Onboarding a New Brand
• Switching Brands
• Cloning a Brand
• Exporting a Brand
• Importing a Brand
• Offboarding a Brand
• Running the Doctor
• Terminal Aliases

To open the online dashboard, visit the Solara Online Dashboard. For full details, refer to the Online Dashboard documentation.

To access the local dashboard, run the following command in your terminal:

solara dashboard

Note: Execute terminal commands at the root of your project.

To open the dashboard for a specific brand, use:

solara dashboard --brand_key YOUR_BRAND_KEY

or

solara dashboard --k YOUR_BRAND_KEY

The dashboard runs on localhost at port 8000 by default. To change the port, use:

solara dashboard --port 8001

or

solara dashboard -p 8001

1. Access the Solara Dashboard: Follow the steps in Accessing the Dashboard.

2. Onboard Brand: Click the + Add button.

   
   

   

   
   

3. Fill Out Brand Form: Enter the key and name of the new brand, then click Onboard Brand.

   
   

   

   
   

4. Configure Brand Settings: Click on the brand to configure its settings on the Brand Management page.

   
   

   

   
   

To switch to a different brand, click the Switch button.

After modifying brand configurations on the Brand Management page, the Apply Changes button will appear to facilitate the switch.

1. Open Brand Options: Click the overflow button (three vertical dots).

   
   

   

   
   

2. Select Clone: Click the Clone option.

   
   

   

   
   

3. Fill Out Brand Form: Enter the key and name for the new brand, then click Onboard Brand.

   
   

   

   
   

4. Configure New Brand Settings: Click on the brand to adjust its settings on the Brand Management page.

   
   

   

   
   

To export a brand, click the export button as shown below:

To import a brand, visit the Solara Online Dashboard. For detailed instructions, refer to the Online Dashboard Wiki.

1. Open Brand Options: Click the overflow button (three vertical dots).

   
   

   

   
   

2. Select Offboard: Click the Offboard option.

   
   

   

   
   

3. Confirm Offboarding: A confirmation dialog will appear; click Confirm to proceed.

   
   

   

   
   

To perform a health check, click the Doctor option.

Additionally, the doctor is executed each time you open the dashboard or make a new change. To access the results, please click the button at the bottom right of the screen.

Terminal aliases provide shortcut access to common and brand-specific commands. To view them:

1. Open Brand Options: Click the overflow button (three vertical dots).

   
   

   

   
   

2. Select Terminal Aliases: Click the Terminal Aliases option.