Externnal Linkage (VMCProtocol) - Snow1226/CameraPlus GitHub Wiki

Externnal Linkage (VMCProtocol)

By using the external linkage function
You can control the camera position such as VirtualMotionCapture(referred to as VMC) from Camera Plus.

1) Sender Button

Check Enable OSC motion receiver of VMC Protocol Motion receiver from Setting of VMC, Check the Port number.

Press Sender in the External Linkage menu of CameraPlus, and enter the number displayed by the Check IP button of VMC in the Address below, 127.0.0.1 if you are running VMC on the same PC, or if you are running on another PC. Please give me. Also, enter the Port described in VMC in Port.
location information is sent from CameraPlus and VMC layout becomes the same as the screen layout of CameraPlus.

2) Receiver Button

This feature requires VMCAvatar Mod.
Also, in order to receive camera position data, an application that sends from the outside is required.
For example, pixiv FANBOX version VMC etc.