ESP8266 DT W5G1 - SmartArduino/SZDOITWiKi GitHub Wiki

Introduction

The core processor of DT-W5G1 module adopts ultra-low power processor and 2G-5G dual-frequency chip. The chip integrates 32-bit microcontroller with 16-bit streamlined mode and 160 MHz main frequency in smaller size package. DT-W5G1 has a complete Wi-Fi network function, which can be used as a slave plane and carried on other host MCUs. DT-W5G1 can be booted directly from external Flash when it responds alone. The built-in cache memory can improve the system performance and optimize the storage system. In addition, DT-W5G1 can be used as Wi-Fi adapter only through SPI/SDIO or I2C/UART, and should be applied to any microcontroller-based design.

  • DT-W5G1 module supports standard IEEE802.11a/b/g/n protocol and complete TCP/IP protocol stack. Users can use this module to add networking functions to existing devices, or to build independent network controllers.
  • DT-W5G1 module for maximum practicability, Wi-Fi function embedded in other systems to provide unlimited possibilities.
  • DT-W5G1 module has the characteristics of wide bandwidth and long distance communication, and can be used for wireless image transmission.

Features

  • SOC specifications
  • Built-in 160MHz MIPS RISC processor
  • 512K SRAM
  • Communication speed: 72Mbps（20MHz）
  • Optimum balance &LLR quantification

Wi-Fi specifications

  • Support 802.11 a/b/g/n,2.4-2.5GHz,4.9-5.85GHz
  • 2.4GHz Rx sensitivity: -75dBm/11n HT20 MCS7,Tx power: 21dBm
  • 5GHz Rx sensitivity: -74dBm/11n HT20 MCS7, Tx power: 16.5dBm
  • Support Station, SoftAP mode
  • Support Wi-Fi Direct(P2P)
  • Support CCMP(CBC-MAC, computing mode), TKIP(MIC、RC4), WAPI(SMS4), WEP(RC4)、CRC hardware acceleration
  • P2P discovery, P2P GO mode/GC mode and P2P power management
  • Support seamless roamless
  • Support AT remote updation and cloud OTA updation;
  • Support SmartConfig function for Android and iOS device SmartConfig.

Peripheral for Module

  • 2xUART
  • 3xADC
  • 1xHSPI
  • 1xI2C
  • 1xI2S
  • 2xDMA
  • 2xPWM
  • Max 23xGPIOs
  • 2M byte SPI Flash
  • Working temperature: -30℃-85℃
  • Module size: 17.5mm×34.5mm

Application

  • Serial Transparent transmission;
  • Smart power plug/Smart LED light;
  • Sensor networks;
  • Wearable electronics;
  • Security ID label;
  • Wireless location recognition;
  • Wireless location system beacon;
  • WiFi prober;
  • Mesh networks;
  • Industrial wireless control.

Download