setup guide - SkycoinWikis/Skyminer GitHub Wiki

Skyminer HOME » HARDWARE » SKYMINER » SETUP GUIDE

Official Skyminer Welcoming

This guide contains all of the necessary information to assemble, register and operate your official skyminer. This guide is written under the assumption of no previous knowledge or technical experience.

Table of Contents

Introduction


We are happy to welcome you on board the Skyfleet, please read this guide thoroughly to not miss out on any important information.

Building, operating and maintaining a Skyminer will demand a certain amount of your time and dedication. Our dedicated team of software and hardware engineers are on hand to support you through this process.

The support team can be contacted by:

  • Joining the exclusive official miner channel. Details of this can be found in your Skyminer welcome email.
  • Using the support form

Each section of this guide highlights how to contact the support team. It's highlighted in bold and begins with Contact support


We also encourage you to join our great community on Telegram:

The steps you're about to follow are:

  1. Understanding the Skywire testnet rules and requirements to qualify and earn rewards.
  2. Assemble your official Skyminer.
  3. Flashing the micro sd cards with the prepared images or installing Skywire from source.
  4. Verifying the network settings of your official Skyminer.
  5. Registering your public keys on the Skywire Whitelisting System.

You can find flow chart of all steps in the appendix.

Assembly

Depending on previous experience your Skyminer can take anywhere from 2-6 hours to assemble.

Contact support via the support form if you need some advice or anything is missing in your package.

You can find a comprehensive assembly manual by following this link or at skycoin.com/downloads

Visual Information

Software

Depending on your experience / technical know-how you can:

The software installation guide will help you to perform either of the two steps.

Contact support if you need help with any of these two steps.

Registration

The [Skywire Whitelisting System] (https://whitelist.skycoin.com) ([get to the guide] (https://github.com/SkycoinProject/skywire/wiki/Skywire-Whitelisting-System)) allows you to manage and maintain your Skyminer registration. Within this system, you can manage:

By purchasing an official Skyminer you will have received an automated welcome email. Please follow these instructions to complete your registration.

Password & Data Submission

Please complete the following:

  1. Setup your own password
  2. Confirm your account
  3. Enter your public Skyminer keys and the Skycoin wallet address you wish to receive the rewards.

1) Setup your own password

Please visit auth.skycoin.com to create your personal password. If you receive an error saying that the personal access token expired, simply request a new one by clicking on Forgot your password?.

2) Confirm your account

Next, visit auth.skycoin.com and click the confirm account button. You will receive an account verification email, click the link to authorize your account. Please check out this

3) Enter your Skyminer public keys and Skycoin wallet address

After you confirmed your account visit whitelist.skycoin.com to access the Skywire Whitelisting System.


If you have less than 8 public keys because you received DOA components, simply submit as many public keys as you have at the time and update the keys once you received your replacement. Don't forget to request your replacement from the support!

Once you pasted all of your public keys press 'Submit' and your public keys are stored. Refresh the page to double check your information is correct.


Contact support via the support form if you need replacements or help to perform any of the steps!

Operating Instructions

Now that you performed all of the previous steps the only task that's left is to keep your nodes online to meet [the reward requirements] (https://github.com/SkycoinProject/skywire/blob/master/testnet_rules.md#facts).

Please check out [the Online Status Verification User Guide] (https://github.com/SkycoinProject/skywire/wiki/Online-Status-Verification-User-Guide) to verify that your nodes are online if you haven't done that already.

You are responsible for keeping your nodes online but never hesitate to ask for support if you have any issues!

Troubleshooting

This section will help you with a few common issues.

Dead On Arrival

If you have received DOA orange pi prime boards, because they can't be accessed via SSH and/or are not showing up in the manager web interface, please perform the following troubleshooting steps:

  • reboot the router
  • reboot the manager
  • reboot the board(s) in question
Don't operate on live equipment. Always make sure the devices are turned off before you touch them. Follow the safety precautions from the assembly guide

If that doesn't help, try:

  • to reset the router
  • turn off the board(s) in question
  • exchange the micro sd cards with a working board (which must be turned off before extracting the micro sd card)
  • exchange the power supply with a working board
  • exchange the LAN cables with a working board
  • switch the LAN port on the router with a working port
  • measure the output voltage of the power switching unit (PSU):
    • the voltage should be at min. 5.0 V. Do not go above 5.3 V in any case.
    • increase the voltage in 0.1 V steps and check if the board is turning on after each increase

Contact support via the support form to request replacements of your faulty components!

Networking Issues

In case you are experiencing any networking issues that cannot be resolved, please check out this section of the networking guide. If your issue is not covered there or you need additional help, please contact support via the support form or, preferably, on Telegram in the dedicated official Skyminer chat.

Appendix

The links shown in the following chart are as follows:


flow_chart

⚠️ **GitHub.com Fallback** ⚠️