compatibility - ShikOfTheRa/scarab-osd GitHub Wiki
CAMERA COMPATIBILITY ISSUES
Known issues are as follows:
- No display - SEE BELOW
- Feint flickering lines - SEE FAQ
- White glow effect - SEE FAQ
Tested GOOD cameras These cameras have been reported as working good with MAX7456 chips used hardware supported by MWOSD
- Runcam sky plus - http://shop.runcam.com/runcam-skyplus/
- Runcam swift - http://shop.runcam.com/runcam-swift/
- Eachine 1000TVL Camera 1/4 Cmos - http://www.banggood.com/Eachine-Racer-250-Drone-Spare-Part-PAL-1000TVL-Camera-14-Cmos-p-1007090.html
- Quanum 700TVL CCD SONY - https://www.hobbyking.com/hobbyking/store/%5F%5F89691%5F%5FQUANUM%5F700TVL%5FSONY%5F1%5F3%5FCamera%5F2%5F1mm%5FLens%5FPAL%5F.html
- Eachine MC02 (AIO 900TVL 1/3 CMOS Cam + 25mW/200mW 40CH VTX) - http://www.eachine.com/Eachine-MC02-AIO-5_8G-40CH-900TVL-25MW-to-200MW-Switchable-VTX-1-or-3-Cmos-FPV-Camera-p-405.html
- Foxeer HS1189 / Monster / XAT1200M - http://foxeer.com/monster.html - (set the cam to NTSC in the settings, OSD flickers in PAL mode. #define fastpixel is not needed)
- Runcam Eagle 16:9 - http://shop.runcam.com/runcam-eagle/ - (set the cam to NTSC in the settings, picture glitches in PAL mode)
Tested PROBLEM cameras Cameras with known compatibility issues with MAX7456 chip Either no OSD test displayed or more likely feint / flickering text Cameras based upon the Nextchip 2090 seem to be the only ones affected. Nextchip 2040 work OK
- Runcam sky - http://shop.runcam.com/runcam-sky/
- Eachine CCD 700TVL - http://www.banggood.com/Eachine-CCD-700TVL-148-Degree-Lens-FPV-Camera-p-977401.html
- Eachine CCD 800TVL - http://www.banggood.com/Eachine-800TVL-13-CCD-110-degree-2_6mm-FPV-Camera-NTSC-PAL-p-1002039.html - no display