EN|中文

• MQTT Channel FOTA Self Test Guide
• WSF Channel FOTA Self Test Guide
• LinkKit Channel FOTA Self Test Guide

Create an upgrade firmware and get its version number

$ aos make clean && aos make mqttapp@{board}

record version number as app-1.0.0-20180319.2129

Log in on IoT Suite platform，固件升级 -> 添加固件

The固件版本号 must be correct or will lead to upgrade failure

Log in on IoT Suite platform，and click on 验证固件

版本号 refers to current version number deviceName is name of the device to be upgraded

You can see upgrade process through serial port. After upgrade, the device will restart, and report new version number.

Create an upgrade firmware and get its version number

$ aos make clean && aos make linkkitapp@{board}

record version number asapp-1.0.0-20180320.1310

Log in on IoT Suite platform，固件升级 -> 新增固件

The固件版本号 must be correct or will lead to upgrade failure

Scenario：upgrade the device (version numberapp_1.0.0_20180319.1020，device name test_light_08 to app_1.0.0_20180320.1310

Log in on develop platform，select the firmware to be upgraded, and click on 验证固件

You can see upgrade process through serial port. After upgrade, the device will restart, and report new version number.

It has been upgraded to app_1.0.0_20180320.1310.