Welcome to the WIP Batorcera fork to add support for PS5000 console.

Compilation Steps

Follow these steps to compile the firmware.

• Clone our repo:

  • HTTPS: git clone https://github.com/Ruka-CFW/batocera.linux.git
  • SSH: git clone [email protected]:Ruka-CFW/batocera.linux.git

• Change your directory to that folder and switch to our rk3128-wx8 branch:

$ cd batocera.linux
$ git checkout rk3128-wx8

• Update submodules (buildroot) and switch to our rk3128-wx8 branch:

git submodule update --init --recursive
git checkout rk3128-wx8

• Set the configuration for the PS5000 with:

make O=$PWD/output/ps5000 BR2_EXTERNAL=$PWD -C $PWD/buildroot batocera-ps5000_defconfig

• Change directory to output/ps5000 with: cd output/ps5000
• Start compilation with make

Depending on your system this may take more or less, but it will be about 1-4 hours

Once the build is complete, you should find the generated image in this path: output/ps5000/images/batocera/images/ps5000

You will find the following files there:

• batocera-ps5000-32-20210923.img.gz (this is the SDCard firmware)
• batocera-ps5000-32-20210923.img.gz.md5
• batocera.version
• boot.tar.xz
• boot.tar.xz.md5

Flash the firmware with your preferred tool (e.g. Balena Etcher). You will need at least a 4GB card, but we recommend a minimum of 16GB. The system will automatically expand the card to use all the space available during the first boot.