MEGA2560 EthernetW5500 Specifications - RobotDynOfficial/Documentation GitHub Wiki
| Input Voltage (VIN/DCВ jack) | 7~12V |
| PowerВ IN (USB) | 5V-limit 500mAВ |
| PoE Type | No PoE/Active PoE/Passive PoE |
| PowerВ IN (PoE) | Optional module, 48V(Input), 9V(Output) |
| Digital I/O | 54 |
| PWM Output | 12 |
| Analog I/O | 16 |
| Reserved Pins | • D4В is used forВ SD card select; • D10В is used for W5500 CS; • *Optional: D8В is used for W5500В interrupting, D7В is used for W5500 initialization, D9В is used forВ SD card detect |
| USB socket | Micro-USB |
| Ethernet socket | RJ45 |
| PCB Size | 53.35Г—101.61mm |
| Card Reader | Micro SDВ card, with logic level convertor |
| Weight | 63g |
| Microcontroller | ATmega2560(AVR 8-bit) |
| Operating Voltage | 5VВ |
| Memory Size | 256KB |
| SRAM | 8KB |
| EEPROM | 4KB |
| Clock Speed | 16MHz |
| Microcontroller | Wiznet W5500 |
| PHY compliance | 10BaseT/100BaseTX Ethernet. Full and half duplexВ |
| Operating Voltage | 3.3V |
| Memory | Internal 32Kbytes Memory for Tx/Rx Buffers |
| TCP/IP Protocols | TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE |
| PHY Clock Speed | 25MHz |
| Ethernet Power (IN) | 12~48V DC |
| Output | DCВ 9V В |
| Ethernet Power (IN) | 12~48V DC |
| Output | DCВ 12V |
| WiFI module | ESP-01(ESP8266) |
| Reserved Pins | • D14/TX3 • D15/RX3 |