Accessories Wireless Connection Instructions - ResgreenGroup/Botway-Documentation GitHub Wiki

Current Location: Home->Accessories->Wireless Connection Instructions

Setting Up for Use with BotWay

  1. Turn on the device while holding down the AP button to perform a factory reset.
  2. Power off the device and let go of the AP button.
  3. Power the device back on and look for a Wi-Fi network called "RGGI_XX:XX:XX" matching the AP name on the device information label.
  4. Connect to the network and enter the default password of "password".
  5. Visit the sign-in page via the automatic pop-up on your computer/smartphone or visit 192.168.4.1 via a web browser.
  6. Click on the Setup button to configure BotWay and MQTT Settings.
  7. Set the device information and hit save at the bottom of the screen.
  8. Return to the home page or 192.168.4.1 again and click WiFi Setup
  9. Click on the SSID that matches your BotWay network.
  10. Enter the network password and connect.
    • If the device is able to connect successfully the AP network will automatically exit and turn off.
    • Otherwise please double check your MQTT and WiFi Settings for any errors and retry connecting again
  11. Confirm the device connection via BotWay under the Monitor tab.

Setting Up for Use with MQTT - NON-BOTWAY USE

  1. Turn on the device while holding down the AP button to perform a factory reset.
  2. Power off the device and let go of the AP button.
  3. Power the device back on and look for a Wi-Fi network called "RGGI_XX:XX:XX" matching the AP name on the device information label.
  4. Connect to the network and enter the default password of "password".
  5. Visit the sign-in page via the automatic pop-up on your computer/smartphone or visit 192.168.4.1 via a web browser.
  6. Click on the Setup button to configure MQTT Settings.
  7. Set your device information and hit save at the bottom of the screen.
  8. Return to the home page or 192.168.4.1 again and click WiFi Setup
  9. Click on the SSID that matches your BotWay network.
  10. Enter the network password and connect.
    • If the device is able to connect successfully the AP network will automatically exit and turn off.
    • Otherwise please double check your MQTT and WiFi Settings for any errors and retry connecting again
  11. Confirm the device connection via MQTT Explorer or your broker of choice.