3D Printer Guide

Overview

The 3D Printer is a revolutionary tool in Redemption, allowing players to create high-tier items and weapons. It's a valuable asset, but be mindful not to store anything inside it, as items will despawn and compensation will not be provided.

Requirements

To use the 3D Printer, you will need:

• 3D Printer Kit

• USB Stick

• Printer Filament

• Power Source

  • Car / Truck Battery
  • Metal wire

Obtaining Components

• 3D Printer:
  • Found scattered around the map of Chernarus or purchased from the Safezone Trader for 10,000 rubles.
• Printer Filament:
  • Exclusively findable around the map and server events.

Filament Types and Uses

Type Of Filament	Preview	Uses
RED		Tappers
PINK		Suppressors
BLACK		Armour, Helmets
GREEN		308 AR's/Snipers
YELLOW		Raid Tools
BLUE		Building Tools, Supplies

Setting Up Your 3D Printer

Follow these steps to set up and use your 3D Printer:

1. Place the 3D Printer Kit:
   • Select a suitable location and place your printer kit.
2. Insert the USB Stick:
   • Plug the USB stick into the printer.
3. Connect the Power Source:
   • Attach the Power Source to the printer.
4. Add Filament:
   • Load the printer with the filament type corresponding to the item you wish to print.
5. Select and Print:
   • Open the printer menu and choose the item you want to print.

For a visual guide, watch this tutorial: 3D Printer Setup Guide.

Important Notes:

• Cancelling a print job will result in the loss of filament used. Be sure before you begin!
• Storing Items in the printer will result in the printer malfunctioning. Be sure there in nothing inside before starting a print!

Enjoy using your 3D Printer to enhance your gameplay in Redemption!

Support

If you need additional support, please create a Support Ticket in our discord.