06 Schéma général du prototype - Recovid/Documentation GitHub Wiki
Current Work (still in progress)
- Here are a set of schemas about the RECOVID Equipement.
- These schémas has been updated on the 10th of April 2020
Past schemas & ideas
Three variants are considered, but currently we focus on the one closest to the requirement of medical staff.
Recovid-MD - has to be submitted to regulatory clinical tests before used as a medical device grade ventilator - In french
(updated on the 1st of April 2020)
This is our current target (in english)
Recovid-simple
Recovid-DIY
It is not clear if this type of device is of any use in a Hospital.
No sensors, so no clinically usable data.
Scrap-made presure valves (APL, PEEP)
Material: aquarium tube 4mm internal / 6mm external Section not enough enough I would have to double the diameter 2 or 4 non-return valve: https://www.botanic.com/produit/366004/clapet-anti-retour-pour-pompe-a-air.html pipe 4/6mm : https://www.botanic.com/produit/365979/tuyau-pour-pompe-a-air-4-6mm-silicone-2-5m.html possibility of using diffusers in a volume of water to filter the exhaled air: https://www.botanic.com/produit/365998/diffuseur-aquarium-ceramique-50mm.html ISSUE:
- the rectangular volumes prevent the water used for pressure control from leaving the system I still don't know how to make them.
- the system is not adjustable in pressure ... except to put several PEP control system in parallel with small valves: not terrible
Other considerations
material: aquarium tube 4mm internal / 6mm external
Section not enough enough I would have to double the diameter
2 or 4 non-return valve:
https://www.botanic.com/produit/366004/clapet-anti-retour-pour-pompe-a-air.html
pipe 4/6mm :
https://www.botanic.com/produit/365979/tuyau-pour-pompe-a-air-4-6mm-silicone-2-5m.html
possibility of using diffusers in a volume of water to filter the exhaled air:
https://www.botanic.com/produit/365998/diffuseur-aquarium-ceramique-50mm.html
ISSUE:
- the rectangular volumes prevent the water used for pressure control from leaving the system I still don't know how to make them.
- the system is not adjustable in pressure ... except to put several PEP control system in parallel with small valves: not terrible