Home - RPiClass/ScratchBinCounter GitHub Wiki

Welcome to the ScratchBinCounter wiki!

This is the beginning of our roadmap for the Binary Counter Project.

About the project:

Upon run, BinCounter will light LEDs to correlate to binary numbers as it displays binary from 0 to 31.

Hardware Needed:

• Breadboard
• 5 LEDs
• 5 Capacitors (220ohm or 330ohm should be fine)
• 6 M/F Jumper Wires
• Raspberry Pi 2 (Tested and run with RPi2)
• Power Source for Raspberry Pi
• Raspian OS
• Scratch 7

Software Needed:

What is the desired outcome:

Programming Notes: