Installing and running openSSH on Merlin - RMerl/asuswrt-merlin.ng GitHub Wiki

Installing and running openSSH on Merlin

I got tired of dropbear taking too long to establish a connection, and then dropping the connection every minute or two. So I got an openssh-server running on Merlin.

Tested on RT-AC68U, running 386.5_2
I'm documenting sort of as I go. This was not thoroughly tested from scratch, and my documentation may be incomplete or wrong, but it should still serve as a starting point; hopefully others can confirm that it works, or update it as needed
I'm assuming that you know and understand the basics of setting up and configuring an ssh server and client via CLI
I'm glossing over or completely ignoring prerequisites (eg opkg, jffs, how to edit files)
I'm glossing over configuration and setup options (eg RSA vs DSA vs ECDSA) which may or may not be more or less suitable to other environments, or even my own setup
For simplicity, these examples assume that sshd should only be listing on the LAN, and that's on 192.168.1.1
There are probably things that can be done better. I'm here to learn.

Get started

Install the openssh packages: opkg install openssh-keygen openssh-server

Generate a server key: ssh-keygen -f /opt/etc/ssh/ssh_host_rsa_key

If you have one, put a public key into ~/.ssh/authorized_keys

Edit /opt/etc/ssh/sshd_config. I added these lines for testing:

ListenAddress 192.168.1.1
Port 2222
PermitRootLogin yes
Ciphers [email protected],[email protected],aes256-ctr,aes256-cbc

On the ssh client, edit ~/.ssh/config as needed. I needed to add: HostKeyAlgorithms +rsa-sha2-512,rsa-sha2-256

Trying to start a server now will likely fail, and trying to login now will most certainly result in an error about "account expired". Fix those problems by "fixing" /etc/shadow and /etc/passwd.

Edit /etc/shadow to remove the last "0" on the "admin" line:

Before: admin:$1$xxxxxxxxxxxxxxxxxxxxxxxxxxxx:0:0:99999:7:0:0:

After: admin:$1$xxxxxxxxxxxxxxxxxxxxxxxxxxxx:0:0:99999:7:0::

Or, instead of editing /etc/shadow (as directly above), run this: sed -i.bak.sshd '/^admin/ s!:0:$!::!' /etc/shadow

Add an "sshd" user to /etc/passwd, either by editing it, or running this command:

echo 'sshd:x:22:65534:OpenSSH Server:/opt/var/empty:/dev/null' >> /etc/passwd

Test to check if the server starts and works:

/opt/sbin/sshd -D

Use telnet to check that the right server is listening on the right port: telnet 192.168.1.1 2222 should show something like this:SSH-2.0-OpenSSH_9.0

ssh to the router from desktop/laptop client. Pay attention to the port number, and (optionally) use verbose mode (ssh -v) to double-check the server's version information, looking for something like this: debug1: Remote protocol version 2.0, remote software version OpenSSH_9.0

If needed, testing can be done via /opt/sbin/sshd -d -o 'Port=2222', or similar. Ultimately, all options should be set in /opt/etc/ssh/sshd_config.

If it doesn't work at this point, let us know what's broken and how you fixed it.

Configure the port numbers to what you really want

If it works at this point… Either leave the port numbers as-is, or…

Use the GUI to change the (dropbear) ssh to a different port, eg 2222. nb that port has to be available to make this change; kill any sshd process that may be listening on 2222, or whatever port number you're using here.

Then change /opt/etc/ssh/sshd_config to listen on port 22.

If listening ports are changed, expect to see "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!" messages, when connecting for the first time, and edit the (client side!) ~/.ssh/known_hosts accordingly.

Alternatively, on the client, edit ~/.ssh/config to connect to port 2222, via a "Host" declaration. Or be lazy and inefficient by just using ssh -p 2222 every time.

Now, I've got sshd (openssh) running on port 22, and dropbear running on port 2222, just in case I need it.

Next, changes need to survive reboots.

The "openssh-server" package installs an init.d start-up script, so we shouldn't have to worry about that.

Create (or add to) a shell script /jffs/scripts/shadow.postconf and make sure it's executable:

#!/bin/sh

## make the "admin" account not expired
sed -i.bak.sshd '/^admin:/ s!:0:$!::!' /etc/shadow

Create (or add to) /jffs/configs/passwd.add:

sshd:x:22:65534:OpenSSH Server:/opt/var/empty:/dev/null

Reboot, test, double-check everything.

Profit

More info on "Custom config files" here - https://github.com/RMerl/asuswrt-merlin.ng/wiki/Custom-config-files

If everything worked out, the router can be rebooted, openssh will be listening on your preferred port, and dropbear will be listening on a different port, just in case you need it.

I'm finding openssh much more reliable and stable than dropbear.