2.GATHERING PERTINENT INFORMATION - R-Division-2022-2023-Odd/Repo-04 GitHub Wiki
NEED STATEMENT~~
WIRE CUTTING AND STRIPPING MACHINE
INFORMATION ABOUT COMPONENTS:
| SI.NO. | COMPONENTS USED | ELECTRICAL/MECHANICAL | MECHANISM IDENTIFIED | LINKS |
|---|---|---|---|---|
| 01 | Arduino Mega 2560 | Electrical | The Arduino is a board based on an ATMEL AVR microcontroller. | https://youtu.be/uoG8QTLJTl0 |
| 02 | IR sensor | Electrical | Infrared light (IR) is based on the principles of optics. | -- |
| 03 | Stepper Motor | Electrical | By energizing one or more of the stator phases, a magnetic field is generated by the current flowing in the coil and the rotor aligns with this field. | -- |
| 04 | Potentiometer | Electrical | The basic principle of the potentiometer is that the potential drop across any section of the wire will be directly proportional to the length of the wire, provided the wire is of a uniform cross-sectional area and a uniform current flows through the wire. | -- |
| 05 | 2 Channel relay module | Electrical | 2-Channel 5V Relay Module is a relay interface board, it can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on. | -- |
| 06 | 60 or 30 RPM DC motor | Electrical | A DC motor is an electrical machine that converts electrical energy into mechanical energy. | -- |
| 07 | Breadboard | Electrical | A breadboard is a solderless device for temporary prototypes with electronics and test circuit designs. | -- |
| 08 | Buzzer | Electrical | The flexible ferromagnetic disk is attracted to the coil when the magnetic field is activated, then returns to rest when the magnetic field is off. | -- |
| 09 | Wire stripper | Mechanical | Used to strip wire | -- |
| 10 | Wire spool | Mechanical | To hold wire | -- |
| 11 | Wires | Mechanical | -- | -- |