4.d BILL OF MATERIALS of each subsystem and entire system - Q-division-2020-2021-even/Repo-08 GitHub Wiki

Bill of materials of upper subsystem\moving unit

Sl.no.	Parts name	Materials used	Specifications	Fibrications	Quantity required
1.	Outer side wall	Acrylic sheets	30* 25*0.3	cutting	2
2.	Inner side wall	Acrylic sheets	30* 25* 0.3	cutting	2
3.	Gripper	Steel	----	---	1
4.	Drumstick	wood	diameter-0.630 inch,length-15.635inch	----	2
5.	Bolts	Steel	M4* 10, diameter=4mm	---	10
6.	Nuts	Steel	diameter-4mm, thickness-3mm	---	10
7.	Arduino	---	volt-5V	----	1
8.	LED	---	volt-5V	---	1
9.	DC motor	steel	---	---	2
10.	Steel strips	steel	thickness-4.76mm, width-409.6mm	cutting	1

Bill of materials of lower subsystem

Sl.no.	Parts name	Materials used	Specifications	Fibrications	Quantity required
1.	Drum	Plastic	diameter-572mm, hight-851mm	----	1
2.	Drum stand	steel	----	---	1
3.	Connectors	---	---	---	1

Bill Of Materials of integrated system

Sl.no.	Parts name	Materials used	Specifications	Fibrications	Quantity required
1.	Outer side wall	Acrylic sheets	30* 25*0.3	Cutting	2
2.	Inner side wall	Acrylic sheets	30* 25* 0.3	cutting	2
3.	Gripper	Steel	---	---	1
4.	Drumstick	wood	diameter-0.630 inch, length-15.635inch	---	2
5	Steel strips	Steel	thickness-4.76mm, width-409.6mm	cutting	1
6.	Arduino	---	volt-5V	----	1
7.	Bolts	Steel	M4* 10, diameter=4mm	---	10
8.	Nuts	steel	diameter-4mm, thickness-3mm	---	10
9.	LED	---	volt-5V	---	1
10.	DC motor	----	12V, 100rpm	---	2
11.	Drum stand	Stee	----	----	1
12.	Connectors	---	---	---	1
13.	Drum	plastic	diameter-572mm, hight-851mm	---	1