1.Subsystems of 3d model.

2.Flow chart

()

3.Circuit diagram.

Bill of materials

SL NO	Part name	Material with which part is made up of	Specification of part	Quantity required	Fabrication process
1	DC geared motor	_	DC motor hole .154 inc	5	_
2	LDR sensors	_	.549inc	5	_
3	Ducks	Foam sheet	length=3.5inc,breadth=2inc	5	Laser cutting
4	Disc	Acrylic sheet	radius=1.772inc	5	Laser cutting
5	Base	Acrylic sheet	length=7.874inc,breadth=1.181inc,thickness=.787inc	5	Laser cutting
6	Supporter	Acrylic sheet	length=7.874inc,breadth=1.181inc	5	Laser cutting
7	Rocker	Acrylic sheet	length=5.906inc,breadth=.394inc,thickness=.394inc	5	Laser cutting
8	Jockey	Acrylic sheet	length=4.724inc,breadth=.394inc,thickness=.394inc	5	Laser cutting
9	Slider supporter	Acrylic sheet	length=11.417inc,breadth=1.575inc,thickness=.787inc	5	Laser cutting
10	Slider	Acrylic sheet	length=11.811ic,breadth=.748inc,thickness=.787inc	5	Laser cutting
11	Body	Foam sheet	length=25.197inc,breadth=23.622inc	1	Laser cutting
12	BOLT	STELL	radius=.197inc,length=1.237inc	42	_