Style guide - PurposeOpen/Platform GitHub Wiki

Much of this was taken from Github's Ruby Style Guide and https://github.com/bbatsov/ruby-style-guide. Please add to this guide if you find any particular patterns or styles that we've adopted internally.

Coding Style

Use soft-tabs with a two space indent.
Keep lines fewer than 80 characters.
Never leave trailing whitespace.

Use spaces around operators, after commas, colons and semicolons, around { and before }.

sum = 1 + 2
a, b = 1, 2
1 > 2 ? true : false; puts 'Hi'
[1, 2, 3].each { |e| puts e }

No spaces after (, [ or before ], ).
```
some(arg).other
[1, 2, 3].length
```

Indent when as deep as case.

case
when song.name == 'Misty'
  puts 'Not again!'
when song.duration > 120
  puts 'Too long!'
when Time.now.hour > 21
  puts "It's too late"
else
  song.play
end

kind = case year
       when 1850..1889 then 'Blues'
       when 1890..1909 then 'Ragtime'
       when 1910..1929 then 'New Orleans Jazz'
       when 1930..1939 then 'Swing'
       when 1940..1950 then 'Bebop'
       else 'Jazz'
       end

Use empty lines between defs and to break up a method into logical paragraphs.

def some_method
  data = initialize(options)

  data.manipulate!

  data.result
end

def some_method
  result
end

Syntax

Use def with parentheses when there are arguments. Omit the parentheses when the method doesn't accept any arguments.

   def some_method
     # body omitted
   end

   def some_method_with_arguments(arg1, arg2)
     # body omitted
   end

Never use for, unless you know exactly why. Most of the time iterators should be used instead. for is implemented in terms of each (so you're adding a level of indirection), but with a twist - for doesn't introduce a new scope (unlike each) and variables defined in its block will be visible outside it.
```
arr = [1, 2, 3]

# bad
for elem in arr do
  puts elem
end

# good
arr.each { |elem| puts elem }
```
Never use then for multi-line if/unless.

bad

if some_condition then

body omitted

end

good

if some_condition

body omitted

end
Avoid the ternary operator (?:) except in cases where all expressions are extremely trivial. However, do use the ternary operator(?:) over if/then/else/end constructs for single line conditionals.
```
# bad
result = if some_condition then something else something_else end

# good
result = some_condition ? something : something_else
```
Use one expression per branch in a ternary operator. This also means that ternary operators must not be nested. Prefer if/else constructs in these cases.

bad

some_condition ? (nested_condition ? nested_something : nested_something_else) : something_else

good

if some_condition nested_condition ? nested_something : nested_something_else else something_else end
The and and or keywords are banned. It's just not worth it. Always use && and || instead.
Avoid multi-line ?: (the ternary operator), use if/unless instead.

Favor modifier if/unless usage when you have a single-line body.

# bad
if some_condition
  do_something
end

# good
do_something if some_condition

* Never use `unless` with `else`. Rewrite these with the positive case first.

# bad
unless success?
  puts 'failure'
else
  puts 'success'
end

# good
if success?
  puts 'success'
else
  puts 'failure'
end

Don't use parentheses around the condition of an if/unless/while.

# bad
if (x > 10)
  # body omitted
end

# good
if x > 10
  # body omitted
end

Prefer {...} over do...end for single-line blocks. Avoid using {...} for multi-line blocks (multiline chaining is always ugly). Always use do...end for "control flow" and "method definitions" (e.g. in Rakefiles and certain DSLs). Avoid do...end when chaining.
```
names = ["Bozhidar", "Steve", "Sarah"]

# good
names.each { |name| puts name }

# bad
names.each do |name|
  puts name
end

# good
names.select { |name| name.start_with?("S") }.map { |name| name.upcase }

# bad
names.select do |name|
  name.start_with?("S")
end.map { |name| name.upcase }
```
Some will argue that multiline chaining would look OK with the use of {...}, but they should ask themselves - is this code really readable and can't the block's contents be extracted into nifty methods?

Avoid return where not required.

# bad
def some_method(some_arr)
  return some_arr.size
end

# good
def some_method(some_arr)
  some_arr.size
end

Use spaces around the = operator when assigning default values to method parameters:

bad

def some_method(arg1=:default, arg2=nil, arg3=[])

do something...

end

good

def some_method(arg1 = :default, arg2 = nil, arg3 = [])

do something...

end
While several Ruby books suggest the first style, the second is much more prominent in practice (and arguably a bit more readable).

Using the return value of = (an assignment) is ok assignment with parenthesis.

# bad
if (v = array.grep(/foo/)) ...

# good
if v = array.grep(/foo/) ...

# also good - has correct precedence.
if (v = next_value) == "hello" ...

Use ||= freely to initialize variables.

# set name to Bozhidar, only if it's nil or false
name ||= 'Bozhidar'

Don't use ||= to initialize boolean variables. (Consider what would happen if the current value happened to be false.)

# bad - would set enabled to true even if it was false
enabled ||= true

# good
enabled = true if enabled.nil?

Avoid using Perl-style special variables (like $0-9, $, etc. ). They are quite cryptic and their use in anything but one-liner scripts is discouraged. Prefer long form versions such as $PROGRAM_NAME.
Never put a space between a method name and the opening parenthesis.
```
# bad
f (3 + 2) + 1

# good
f(3 + 2) + 1
```
If the first argument to a method begins with an open parenthesis, always use parentheses in the method invocation. For example, write f((3 + 2) + 1).

Use _ for unused block parameters.

# bad       
result = hash.map { |k, v| v + 1 }

# good
result = hash.map { |_, v| v + 1 }

Naming

Use snake_case for methods and variables.
Use CamelCase for classes and modules. (Keep acronyms like HTTP, RFC, XML uppercase.)
Use SCREAMING_SNAKE_CASE for other constants.
The names of predicate methods (methods that return a boolean value) should end in a question mark. (i.e. Array#empty?).
The names of potentially "dangerous" methods (i.e. methods that modify self or the arguments, exit!, etc.) should end with an exclamation mark. Bang methods should only exist if a non-bang method exists. ([More on this])(http://dablog.rubypal.com/2007/8/15/bang-methods-or-danger-will-rubyist).

Classes

Avoid the usage of class (@@) variables due to their "nasty" behavior in inheritance.
```
class Parent
  @@class_var = 'parent'

  def self.print_class_var
    puts @@class_var
  end
end

class Child < Parent
  @@class_var = 'child'
end

Parent.print_class_var # => will print "child"
```
As you can see all the classes in a class hierarchy actually share one class variable. Class instance variables should usually be preferred over class variables.

Use def self.method to define singleton methods. This makes the methods more resistant to refactoring changes.

class TestClass
  # bad
  def TestClass.some_method
    # body omitted
  end

  # good
  def self.some_other_method
    # body omitted
  end

Avoid class << self except when necessary, e.g. single accessors and aliased attributes.

class TestClass
  # bad
  class << self
    def first_method
      # body omitted
    end

    def second_method_etc
      # body omitted
    end
  end

  # good
  class << self
    attr_accessor :per_page
    alias_method :nwo, :find_by_name_with_owner
  end

  def self.first_method
    # body omitted
  end

  def self.second_method_etc
    # body omitted
  end
end

Indent the public, protected, and private methods as much the method definitions they apply to. Leave one blank line above them.

class SomeClass
  def public_method
    # ...
  end

  private
  def private_method
    # ...
  end
end

Avoid explicit use of self as the recipient of internal class or instance messages unless to specify a method shadowed by a variable.

class SomeClass
  attr_accessor :message

  def greeting(name)
    message = "Hi #{name}" # local variable in Ruby, not attribute writer
    self.message = message
  end
end

Exceptions

Don't use exceptions for flow of control.

# bad
begin
  n / d
rescue ZeroDivisionError
  puts "Cannot divide by 0!"
end

# good
if d.zero?
  puts "Cannot divide by 0!"
else
  n / d
end

Avoid rescuing the Exception class.

# bad
begin
  # an exception occurs here
rescue
  # exception handling
end

# still bad
begin
  # an exception occurs here
rescue Exception
  # exception handling
end

Collections

Prefer %w to the literal array syntax when you need an array of strings.

# bad
STATES = ['draft', 'open', 'closed']

# good
STATES = %w(draft open closed)

Use Set instead of Array when dealing with unique elements. Set implements a collection of unordered values with no duplicates. This is a hybrid of Array's intuitive inter-operation facilities and Hash's fast lookup.

Use symbols instead of strings as hash keys.

# bad
hash = { 'one' => 1, 'two' => 2, 'three' => 3 }

# good
hash = { one: 1, two: 2, three: 3 }

Strings

Prefer string interpolation instead of string concatenation:

# bad
email_with_name = user.name + ' <' + user.email + '>'

# good
email_with_name = "#{user.name} <#{user.email}>"
Prefer double-quoted strings. Interpolation and escaped characters will always work without a delimiter change, and `'` is a lot more common than `"` in string literals.

# bad
name = 'Bozhidar'

# good
name = "Bozhidar"

Avoid using String#+ when you need to construct large data chunks. Instead, use String#<<. Concatenation mutates the string instance in-place and is always faster than String#+, which creates a bunch of new string objects.
```
# good and also fast
html = ''
html << '<h1>Page title</h1>'

paragraphs.each do |paragraph|
  html << "<p>#{paragraph}</p>"
end
```

Regular Expressions

Avoid using $1-9 as it can be hard to track what they contain. Named groups can be used instead.

# bad
/(regexp)/ =~ string
...
process $1

# good
/(?<meaningful_var>regexp)/ =~ string
...
process meaningful_var

Be careful with ^ and $ as they match start/end of line, not string endings. If you want to match the whole string use: \A and \Z.
```
string = "some injection\nusername"
string[/^username$/]   # matches
string[/\Ausername\Z/] # don't match
```
Use x modifier for complex regexps. This makes them more readable and you can add some useful comments. Just be careful as spaces are ignored.

regexp = %r{
  start         # some text
  \s            # white space char
  (group)       # first group
  (?:alt1|alt2) # some alternation
  end
}x

Percent Literals

Use %w freely.

STATES = %w(draft open closed)

* Use `%()` for single-line strings which require both interpolation and embedded double-quotes. For multi-line strings, prefer heredocs.

# bad (no interpolation needed)
%(<div class="text">Some text</div>)
# should be '<div class="text">Some text</div>'

# bad (no double-quotes)
%(This is #{quality} style)
# should be "This is #{quality} style"

# bad (multiple lines)
%(<div>\n<span class="big">#{exclamation}</span>\n</div>)
# should be a heredoc.

# good (requires interpolation, has quotes, single line)
%(<tr><td class="name">#{name}</td>)

Use %r only for regular expressions matching more than one '/' character.

# bad
%r(\s+)

# still bad
%r(^/(.*)$)
# should be /^\/(.*)$/

# good
%r(^/blog/2011/(.*)$)

Style guide - PurposeOpen/Platform GitHub Wiki

Table of Contents

Coding Style

Syntax

bad

body omitted

good

body omitted

bad

good

bad

do something...

good

do something...

Naming

Classes

Exceptions

Collections

Strings

Regular Expressions

Percent Literals

Misc

⚠️ GitHub.com Fallback ⚠️

Style guide - PurposeOpen/Platform GitHub Wiki

Table of Contents

Coding Style

Syntax

bad

body omitted

good

body omitted

bad

good

bad

do something...

good

do something...

Naming

Classes

Exceptions

Collections

Strings

Regular Expressions

Percent Literals

Misc

⚠️ **GitHub.com Fallback** ⚠️

⚠️ GitHub.com Fallback ⚠️