Community_To_Do_List_for_i3_MK3 - PrusaOwners/prusaowners GitHub Wiki

To Be Fixed

Inconsistent Extrusion

Inconsistent Extrusion is still not fixed. Many details can be seen at Github Issue #602.

To Be Improved

Klipper

Done

• Basic Configuration
• Linear Correction
• Compatibility with Brigandier's PrusaMeshMap plugin
• Support for M117, LOAD_FILAMENT, and UNLOAD_FILAMENT gcodes

BETA

N/A

ALPHA

• Mesh Bed Leveling - See Klipper#configuring-mesh-bed-leveling
• Pinda Drift Compensation - See Klipper#alpha-probe-temperature-compensation

Todo (ordered by priority)

• Mesh Leveling Alpha 2 (Parameterized Variables, support larger probe sample and bicubic interpolation, custom gcode to report json serialized probe points to the terminal for Brigandier's plugin)
• Live-z support
• Fan sensors
• Filament sensors
• Use z tops to tram x axis (ram into top)
• Support for homing z axis at center of bed naively rather than through G0
• Octoprint plugin supporting Klipper installation and upgrades
• Support for display connected directly to the Pi

Skelestruder

Done

@leefla -> write up better instructions already! :-)

Todo (ordered by priority)

Bed Leveling Modifications

Mesh bed leveling is nice, but ultimately it leaves parts with curved bottoms (or curved all the way through, if no Z fade is present) or skew. This can be mitigated by leveling the system properly.

Done

• Octoprint Plugin has been made for quickly understanding bed level issues.
• Wave springs under the bed standoffs allow for bed curvature correction.

Todo

• Create Y axis rod mounts that allow leveling
• Create Z stepper mounts that allow leveling
• Create Z axis endcaps that allow leveling

Documentation

@jltx write up SCAD -> STEP flow