Air Filtering System - PrusaMK2Users/MK2_Tips_and_Tricks GitHub Wiki

SkyDrivers Air Filtering System

I use a simple Air Filtering System to Print ABS. As Filter i use a Carbon and a HEPA-Filter.

HEPA-Filter example: http://www.ebay.de/itm/original-vhbw-HEPA-Filter-Set-fur-Dyson-DC05-DC08-DC14-DC15-Vor-Nachmotor-/142111132667?hash=item21167bcbfb:g:Ku4AAOSwIgNXsVSw

Carbon-Filter example: http://www.ebay.de/itm/361645347332?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

As an enclosure i use 2 Lack-Tables with Acrylic-Sides.

I missed to take a Photo from the Filter Holder, but have the STL File. // Update: Found the Thingiverse Page http://www.thingiverse.com/thing:1740538/#files // bottom_fan.stl http://www.ist-nutzlos.de/air_vent/bottom_fan.stl

I made a hole in the Top of the Table and inserted the Filter-Holder. The First Layer was the Hepa-Filter and then the Carbon-Filter.

On this Photo you see the Inside (and yes the LEDs are not fixed, their only there for making a Video for the Prusa-Support). The White/Red Cable you see is one of two Temp-Sensor, the second is in the Corner.

Here is the view from the Top of the Enclosure (it's not fixed yet, waiting for the 2nd Artic-Fan)

And last this is my Fan-Control System can add up to 6 Fans and 6 Temp-Sensors.