03.1. Main Screen (~V0.5.1) - PingguSoft/aTelloPilot GitHub Wiki
aTelloPilot Main Screen (~V0.5.1)
- change pitch/roll control with gyro sensor
- pitch/roll stick is changed to button
- press button for control
- can hide OSD stick
- OSD stick is disappeared automatically when joystick is connected
- stick markers and trim buttons are shown
- These buttons provide same functions as official Tello app provides
- 5~8 buttons are appeared when more button is on
- HandLand
- this switch is just a selection for landing type
- if it is on, landing button will do hand landing
- if it is off, landing button will do automatic landing
- Fast
- activate fast moving mode
- Bounce
- bounce mode as Tello does
- 360
- tello spins at the same place
- Throw
- Up Away
- Circle
- USER4
- take off by default
- it is changed to landing when it is taken off
- will switch photo and video mode
- video resolution will be changed
- take photos when photo mode
- start recording when video mode
8. roll / pitch indicator
- shows drone roll / pitch status
- shows stick position
- joy stick position is also seen
- double-click to reset trims
- center position can be changed with these buttons
- showing Tello heading (always heading north when it starts)
- controller heading (device heading)
- showing controller heading (always heading north when it starts)
- if it doesn't head correct direction when you move, calibrate it by moving your device as 8-shape
-
Tello heading and controller heading (yourself) should be aligned when Tello is turned on
- Tello doesn't have GPS so it can't provide absolute coordinate
- And it doesn't have compass either so it can't provide absolute its heading
- So alignment is required when it is turned on and flight app is started
Extra features
- visible when flypad or GameSir T1D was registered in the settings
- connect registered controller
- show 8-flip direction window
- use DPAD for flipping when joystick is connected
⚠️ **GitHub.com Fallback** ⚠️