What is the Sccp Manager - PhantomVl/sccp_manager GitHub Wiki

The purpose of this project is to create a GUI for configuring the driver SCCP and additional services.

For correct operation of the phone requires the following service tftp, dhcpd, SCCP. At this stage the Manager is required installed and configured service : mysql - realtime, dhcp - set addresses, and phone settings, tftp - files configuration.

The Manager provides automatic generation of the necessary settings for chain-sccp driver and phones. It is important to understand in the absence of any required files, the system Manager will not be able to generate configuration for cisco devices.

In connection with feature phones, you will need the stock firmware for your device model. Availability of language packs for your phones. All of the files previously located in the working directory of the tftp path. The Manager analyzes these \tftpboot directory, and create needed to operate the phones files. The generation of configurations of phones is based on the templates for these models. In the template there is no variable part, and the data which are generated on the basis of data from the database for this device. It allows you if you want to use your own templates. Before you begin you must ensure that all components are configured and you have all the necessary files.

So the working structure \tftpboot:

[Desktops]               - Phone desktop
[English_United_States]  - Phone language
[ring]
[templates]              - Phone templets ( auto create after intsall) 
apps11.9-2-1TH1-13.sbn
apps41.9-2-1TH1-13.sbn
B015-1-0-4.SBN
cnu11.9-2-1TH1-13.sbn
cnu41.9-2-1TH1-13.sbn
cvm11sccp.9-2-1TH1-13.sbn
cvm41sccp.9-2-1TH1-13.sbn
DISTINCTIVERINGLIST.XML
dsp11.9-2-1TH1-13.sbn
dsp41.9-2-1TH1-13.sbn
g3-tones.xml
g4-tones.xml
jar11sccp.9-2-1TH1-13.sbn
jar41sccp.9-2-1TH1-13.sbn
P0030801SR02.bin
P0030801SR02.loads
P0030801SR02.sb2
P0030801SR02.sbn
P0030801SR02.txt
RINGLIST.XML
S00105000400.sbn
SCCP11.9-2-1S.loads
SCCP41.9-2-1S.loads
SEP0000000000.cnf.xml * -  autogenerate
softKeyFile.xml
term11.default.loads
term41.default.loads
WLANDefault.xml
XMLDefault.cnf.xml * - autogenerate

Automatically also create the following file:

 /etc/asterisk/sccp.conf 
 /etc/asterisk/features.conf (on instalation)
 /etc/asterisk/res_config_mysql.conf (on instalation)

  • Now you can open SCCP Server Settings, change settings or leave the settings by default. Be sure to click Save - this will form the necessary for the operation of the Server files.

  • The next step is to check the types of supported devices. Open the page SCCP Advance Server Configuration. This reflects the information on multiple types of devices. If you do not see your phone model in the devices list, change the view mode by clicking the show button enabled -> show All. Locate your model. Select it, and click "Enabled". If you see that your phone model is highlighted in red it means that you must verify the files of the firmware, to verify that the names of the firmware files, and template XML files. In the absence of the necessary data, the model will not be included in the list of supported devices.

All other settings are intuitive and do not have any features. Well, or I forgot to tell you.