NXP LPC176x: Compiling - Paciente8159/uCNC GitHub Wiki

µCNC for NXP LPC176x can be built this way

Method one - PlatformIO (preferred)

1. Get Visual Studio Code and install it.
2. Install the PlatformIO extension.
3. Open uCNC folder in VSCode.
4. Edit cnc_config.h file and cnc_hal_config.h file to fit your needs and board.
5. If needed edit the platformio.ini file environment for your board. Compile the sketch and upload it to your board or sdcard if your board firmware is loaded this way.