Check ECAL SAC HV (old) - PADME-Experiment/padme-fw GitHub Wiki

  1. Log in to ssh -XY daq@l0padme1 (password for daq is on the board in Control Room),then type ssh [email protected] (same here, password on the board in Control Room)
  2. To see all the channels, move to "Main", push "↵", select "Channels" and "↵"
  3. Move with the down arrow to see all the channels. Please DON'T change the values in V0set!
  4. All the channels belong to Group00. If you want to see only the SAC HV channels, use the tab button to move to the top menu, go to "Groups" and then select "Group01". To see again all the channels, use the same procedure selecting "Group00"
  5. If you need to turn off/on the ECAL channels, use the "⇆" key to move on the top menu, go to "Groups" and select "Group 02", which is half of the calorimeter. Use the "⇆" key to move again on "Groups", and select "Group mode". Move to the "Pw" area, and use the space bar to turn off/on the channels. To turn on the other half, use the same procedure on Group03
  6. If you only need to turn off/on SAC channels, select "Group01" as described in 4. and use the "Group mode"
  7. To exit the HV controller, use the "⇆" key to move to the top menu, go to "Main" and select "Log out", then "↵"
  8. Sometimes the crate looses the group configuration, so please check SUs' status when you turn ECAL/SAC on/off. If necessary, select "Group00" to turn on/off all the HV crate channels