Review 1 - P-Division-2018-2019/Team-16 GitHub Wiki
Need statement:Bar Bending machine
Designers: Abdul Qayum,Kartikey,Ibza,Gouri.
Clients: miss. Ashwin Sir.
- What is the the budget?
- What should be the size of the machine?
- Do you want to run it on a motor or with the pressure?
- Do you want to run it in 3D?
- What type wire you want to bend ?
- Do want to bend wire in specific shape?
- Do you notification feature in machine?
- Do you want to run machine on battery or ac power supply?
- Do you want automatically sense the wire or you need a on button?
-
How much time you need to bend he wire?
Objectives
- Cost efficient
- Notification feature
- Less time consumption
- Easy to use
Pair wise comparison chart
| Easy to use | Notification | Cost efficient | Less time consumption | Ranking |
|---|---|---|---|---|
| Easy to use | *** | 1 | 1 | 1 |
| Notification | 0 | *** | 0 | 1 |
| Cost efficient | 0 | 1 | *** | 1 |
| Less time consumption | 0 | 1 | 0 | *** |
Ranking
| Objective | Ranking |
|---|---|
| Safety | 1 |
| Less time consumption | 2 |
| Automated | 3 |
| Less cost | 4 |
| Easy to use | 5 |
Problem definition V1.1
Bar bending bot which must be safe to use, utilizes less time, automatic, less cost and easy to use.
Constraints:
- Cost of the machine should be less than 5000 rupees.
- Should bend in square, rectangle .
- It should bend wire of diameter 1 to 6mm.
- It should bend the wire of length of max 5 feet.
- It must be capable of bending 10 wire in 5 minutes.
- Should bend angle less than 120 degree.
Problem definition V1.2
The cost of the machine should be less than 5000 rupees. It should bend in specific 2D design.it must be capable of bending the wire of length 5 feet and width 6mm.it must also bend 10 wires in 5 minutes and it must bend in angle less than 120.
Functions:
- Bending the wire.
- It should be able to feed the wire. ****3. It should bend the wire in square (side=3cm), rectangle (length=4cm, breadth=2cm) .
- Notification feature.
- The wire must be fed manually.
Problem definition V1.3
Bar bending bot which must be safe to use, utilizes less time,automatic,less cost and easy to use.The cost of the machine should be less than 5000 rupees. It should bend in specific 2D design. It should bend the wire in square shape. It must be capable of bending the wire of length 5 feet and width 3mm.it must also bend 10 wires in 5 minutes and it must bend in angle less than 120.The wire is feed manually. It should be able to straighten the wire . And notify after completing the work.