Insp pics

Panning

This is the first rough drawing we did spitballing ideas for the station box

I then drew up a desing on paper

after drawing it up and coming up with measurements i made it up in fusion 360. I based the measurments (that i came up with) on products that we wanted the biggest one being the vents which at the time were 300 x 200mm.

the original desing was way to big with the max hight at 600H 500W 400L, so I ended up going to the roof with kayla and tayla and using a tape measure to find the perfect size for the box. We agreed that we want the box at around 360 x 360mm cutting the original box in half. I found a new vent that was 225 x 225mm This is the new desing

The Holes in the side is where the vents will go to provide airflow This is just an idea of what it might look like, i made it in fusion so that i could get a good idea on mesurements and how it would all fit to get here

Front

Side

Back

Roof

Work in Progress