Overview - OpenPTrack/open_ptrack GitHub Wiki
This documentation describes how to build and run an OpenPTrack system. We suggest following the order of steps in this documentation, to get a good sense of what constitutes a functional system. The Deployment Guide provides additional practical advice, based on experience using OpenPTrack for our own applications.
- Overview - this section; you're here.
- Supported Hardware - what types of imagers and computers are supported and recommended.
- Installation - how to get and install the software.
- Time Synchronization - configuring time synchronization for your OpenPTrack system.
- Pre-Calibration Configuration - configuring the basic elements of your OpenPTrack system.
- Intrinsic Calibration - this step is performed for each imager, after configuration.
- Camera Network Calibration - the overall camera network is calibrated, after intrinsic calibration.
- Tracking - you can begin tracking!
- Tips and Tricks - some tips and tricks, from lessons we've learned (not yet incorporated into the rest of the documentation).