NP1380

 ========================================================
 ==================  ========   =======     =====      ==
 =================   ======   =   ====  ===  ===   ==   =
 ==================  =====   ===   ==  =====  ==  ====  =
 =  = ===    ======  ==========   ====  ===  ===  ====  =
 =     ==  =  =====  ========    ======     ====  ====  =
 =  =  ==  =  =====  ==========   ====  ===  ===  ====  =
 =  =  ==    ======  =====   ===   ==  =====  ==  ====  =
 =  =  ==  ========  ======   =   ====  ===  ===   ==   =
 =  =  ==  ======      ======   =======     =====      ==
 ========================================================

Boot logs

UART log (sysloader.ipk is installed)

linux-new kernel

Source code:
https://github.com/OpenNoah/linux-new

Kernel version 5.17.3

make ARCH=mips CROSS_COMPILE=mipsel-linux- noah_np1380_defconfig
make ARCH=mips CROSS_COMPILE=mipsel-linux- uImage

Driver	Status
ADC	OK
Battery	?
Touchscreen	TSLIB OK, no DMA
UART	OK
OHCI (USB host)	OK, no DMA
MUSB (USB device)	OK, no DMA
USB gadgets	g_ether: OK
MMC/SD	OK, hotplug unknown
NAND/MTD/UBI	ubi does not support MLC
Framebuffer (LCD)	OK
LCD backlight	OK
Audio	Unknown
Keypad	No keymap in DT yet
CPU power management	Unknown
cpufreqd	Not exist