UP1 Case - OpenKNX/OpenKNX GitHub Wiki

The UP1-Case is a generic 3D model of a 3D-printable case. It consits of a bottom and top part where the bottom part hodlds the pcb. Both parts are held together with a M2 screw.

Since the CATIA sources are in the repo, feel free to adapt the generic UP1-Case to fit your needs.

As an alternative, you can print the UP1-Case and make cut outs for e.g. terminals with a knife or drill.

If you don't have CATIA, you may work with the STL and modify it with a CAD of your choice.

All ressources can be found in the Repository