REG1 Module Case - OpenKNX/OpenKNX GitHub Wiki

Table of Contents Description Ressources Sourcing Ressources REG1-Controller-Module-Case V01.00 Final assembly Developer documentation Version history Pictures

The REG1-Module-Case is part of the OpenKNX-REG1 system and allows to use the REG1-Controller2040 not only as controller on DIN-Rail but also in a smaller module case. On the bottom there are optional holes for accessing Prog, Reset und Bootloader Switches and the Prog-LED. Micro-USB is accessible from the side.

You will get complete kits with almost all parts already be soldered here for a donation. Some soldering skills are still neccessary.

Reg1_Main_Case.stl

Reg1_Case_Cover.stl

When used in this case, on the REG1-Controller2040 that parts must be soldered by the user:

• J100 - soldering pins for the KNX connector
• GN100 - 01x07 2.54mm pin header for connecting the NanoBCU
• J200 - 01x04 3.5mm THT screw terminal for I/O
• SW100 - Prog Switch
• SW101 - Bootloader Switch
• SW102 - Reset Switch
• LED100 - 0805 SMD LED (on the top side of the LED, cathode (-) is marked green. This side must be oriented to the closed side of the printed U around the footprint)
• R100 - 0805 1k SMD resistor

optional:

• R109/R110 - 0805 SMD resistor for I/O

optional part placement is defined by the application.

• V01.00 - first prototype

[ garbage]