REG1 Case - OpenKNX/OpenKNX GitHub Wiki

Table of Contents Description Ressources REG1-Case V01.00 Sourcing Developer documentation Version history Pictures

The REG1-Case is part of the OpenKNX-REG1 system and is the standard case for the the REG1-Controller2040 to build a 1 TE REG device.

Reg1_Main_Case.stl

Reg1_Case_Cover.stl

Alternative Cover with opening for the 8pin connector to the UP1-Progger (needed for SWD Debugging):

Reg1_Case_Cover_SWD.stl

Six screws are needed: Use DIN 7982 2,2x6,5

You will get complete kits including this case here for a donation.

• V01.00 - first published version