Manual - OpenI6X/opentx GitHub Wiki
User Interface
| Button | Function |
|---|---|
UP |
Move up, scroll values.Long press on the main screen to go to Statistics screen. |
DOWN |
Move down, scroll values.Long press on the main screen to show Telemetry screens. |
OK |
Accept, select option. Short press on main screen to show Popup menu. Long press on main screen to go to Models menu.Long press on source field to bring Source Select popup. |
CANCEL |
Return, back, cancel.Long press in ExpressLRS menu to exit. |
BIND |
Scroll pages right or left (long press).Go right in a line.Long press on the main screen to go to Radio Settings menu.Long press in text input to convert between lower case and upper case letters. |
DFU Mode (Firmware update mode)
How to boot info firmware update mode: Push both the two inner horizontal trim buttons together and power on the radio at the same time.
Shutdown
The FlySky FS-i6X does not have a software-controlled shutdown button. If you see a ▫ (small square) icon in the top-right corner of the main screen, wait until it disappears, as it indicates that settings are still being saved. Alternatively, you can use the "Save settings" option from the main screen's popup menu to:
- Speed up the saving process.
- Save timers (timers are not saved automatically).
- Save changes while USB is connected (settings are not saved automatically when USB is connected).
Powering by 2S Li-Po/Li-ion/18650
FlySky i6X is officially rated for up to 6V. Running anything above will damage your radio.
Mode 1 & Mode 3 radios
With Mode 1 & Mode 3 radios you may experience inverted gimbal movement and swapped gimbals on main screen. To fix this swap gimbal connectors (red-white one with black-white one).