2.PERTINENT INFORMATION GATHERING - O-division-2021-2022-Even/Repo-04 GitHub Wiki
INTRODUCTION
This project aims in creating a working model of controlled Paper Stamping Machine that works on an Arduino controller which controls the stamping mechanism of paper useful in many fields like Universities, Government offices, Post offices, Banks, Colleges etc. The feed of the paper will be accomplished using a roller mechanism and the stamping will be done by incorporating a simple link mechanism.
NAME | WORKING MECHANISM | COMPONENTS NEEDED | REFERENCE LINK or PIC |
---|---|---|---|
KISHAN | Roller crank mechanism | Roller,stamping processor,IR sensor,wires,dc motor,wooden box,battery | https://youtu.be/FwiGPVqmz78 |
DEEPAK | Scotch yoke mechanism | Stamp,Gears,Metal-chain belt,Roller to move,Aurdino,DC-Motor | https://www.youtube.com/watch?v=1U0XeWb3Tec |
VIVEKANANDA | Hydraulic Press Stamping Mechanism | Stamp,Gears,Hydraulic suspensions,Motor, Hydraulic cylinders,Ink pad,Roller | https://youtu.be/AfOpOcDWVp0 |
RITWIK | Sliding mechanism, Feeder mechanism | Arduino microcontroller, rollers, shaft, stamp, stepper motor | https://www.ijser.org/researchpaper/ARDUINO-CONTROLLED-AUTOMATIC-PAPER-STAMPING-MACHINE.pdf |
NISHCHIT | X Y Plotter mechanism | Arduino, roller belt, few printed circuit boards, switches and stamp | https://www.youtube.com/watch?v=ZdLs4QHct60&ab_channel=EasyHomeMadeProjects, https://learnmech.com/design-and-fabrication-of-automatic-stamping-machine-for-post-card/ |