7. Modeling: Sub systems deliverables - O-Division-2020-2021-Even/Repo-4 GitHub Wiki
Sub-System 1: Crushing unit.
3D Model:
Circuit Design:
Flowchart:
Bill of Materials:
Sl.no | Part Name | Material of the Part | Description | Quantity | Amount |
---|---|---|---|---|---|
1 | DC motor | Iron/Steel | 10 rpm | 1 | 300 |
2 | Crank wheel and shaft | Foam sheet | 45mm X 10mm & 10mm X 3mm | 1 | 100 |
3 | Rods | Aluminium | 10mm X 180mm & 25mm X 80mm | 2 | 150 |
4 | Casing | Acrylic sheets | 112mm X 150mm X 10mm | 4 | 100 |
5 | Nuts, screws | Steel | 10mm X 3mm | 10 | 150 |
6 | Ultrasonic Sensor | - | Used to sense the cup | 1 | 75 |
7 | Arduino uno | - | Used to connect all the parts | 1 | 800 |
Total | 1675 |
Sub-System 2: Dispensing unit.
3D Model:
Circuit Design:
Flowchart:
Bill of Materials:
Sl.no | Part Name | Material of the Part | Description | Quantity | Amount |
---|---|---|---|---|---|
1 | DC motor | Iron/Steel | 10 rpm | 1 | 300 |
2 | Crank wheel and shaft | Foam sheet | 45mm X 10mm & 10mm X 3mm | 1 | 100 |
3 | Slider crank link | Foam sheet/plastic | 180mm X 5mm & 70mm X 5mm | 2 | 50 |
4 | Base | Foam Sheet | 230mm X 360mm X 10mm | 1 | 100 |
5 | Casing of DC Motor | Foam sheet | 21mm X 10mm X 25mm | 4 | 50 |
Total | 600 |
Sub-System 3: Alerting unit.
3D Model:
Circuit Design:
Flowchart:
Bill of Materials:
Sl.no | Part Name | Material of the Part | Description | Quantity | Amount |
---|---|---|---|---|---|
1 | LED | Semicondutor materials used | Used to indicate | 1 | 10 |
2 | Ultrasonic Sensor | - | Used to sense the cup | 1 | 75 |
3 | Wires | Copper | Used to connect different parts of the circuit | 10m | 100 |
4 | Dispensing Box | Foam Sheet | 58mm X 110mm X 10mm | 1 | 50 |
Total | 235 |