Part 2 (ShadowNAND) - NightScript370/Follow-up-Guide GitHub Wiki

ShadowNAND is a CFW in your NAND. It will be installed like A9LH, and will simply work without SD. It can be used with any CFW to boot your device and it can be booted without SD card. The best CFW to use with this is SaltFW. SaltFW and ShadowNAND were created by @RShadowhand. Luma3DS is the harder one but it's worth it. Luma3DS and Cobernik currently have payload chainloading. The other CFW's will have to use BootCTR9.

##What you need

The latest version of ShadowNAND Installer
The latest version of ShadowNAND
Other required files
Luma: Luma Updater configuration file
Gateway and DSTWO: https://gist.github.com/maorninja/227caa7f96e1a63f9b710b0e7bb1a53c
CakesFW: https://gist.github.com/maorninja/480f3a3d9d617f196b9d566422e7d4f9
The latest release of Shadowhand's FBI

##Instructions

Section I - Luma Config

If you don't want to do this, just download this: https://gbatemp.net/attachments/boot-zip.53757/

Go to this
Put in the link sdmc:/homebrew/boot.bin

Section II - ShadowNAND install

Put ShadowNAND files and other required files to SD:\homebrew\a9lh\
Luma3DS: Put boot.bin to SD:\homebrew\ and lumaupdater.cfg into the root
Rename ShadowNAND_Installer.bin to arm9loaderhax.bin and put it in SD:\
SaltFW: copy saltFW.bin into SD:\homebrew\
Put FBI-230N-DARK-Fixed.cia into SD:\homebrew\cia\
Put your SD card into your 3DS and Boot your 3DS
Press Select
Done

Section III - Non-Luma Setup

Put BootCTR9 files in /homebrew/ and on root.
Copy specific boot_config.ini onto root and homebrew folder
Done

Section IV - Installing NAND tools

Currently, Shadowhand make a FBI that installs to NAND. However, he will be releasing more tools in the future.

Load Health and safety (Which is FBI)
Navigate to SD:\homebrew\cia
Select FBI-230N-DARK-Fixed.cia and press A to install