SNMPInterfaceCollector - Netuitive/omnibus-netuitive-agent GitHub Wiki

The SNMPInterfaceCollector is designed for collecting interface data from remote SNMP-enabled devices such as routers and switches using SNMP IF_MIB

Configuration

Below is an example configuration for the SNMPInterfaceCollector. The collector can collect data any number of devices by adding configuration sections under the devices header. By default the collector will collect every 60 seconds. This might be a bit excessive and put unnecessary load on the devices being polled. You may wish to change this to every 300 seconds. However you need modify your graphite data retentions to handle this properly.

[SNMPInterfaceCollector](/Netuitive/omnibus-netuitive-agent/wiki/SNMPInterfaceCollector)
enabled = True
path = interface
interval = 60
retries = 3
timeout = 5

[[devices](/Netuitive/omnibus-netuitive-agent/wiki/[devices)]

[[[router1](/Netuitive/omnibus-netuitive-agent/wiki/[[router1)]]
host = router1.example.com
port = 161
community = public

[[[router2](/Netuitive/omnibus-netuitive-agent/wiki/[[router2)]]
host = router1.example.com
port = 161
community = public