how_to_build_linux - NanashiTheNameless/OrcaSlicer_WIKI GitHub Wiki

Build on Linux

Linux distributions are available in two formats: using Docker (recommended) or building directly on your system.

Using Docker

How to build and run OrcaSlicer using Docker.

Docker Dependencies

  • Docker
  • Git

Docker Instructions

git clone https://github.com/NanashiTheNameless/OrcaSlicer && cd OrcaSlicer && ./scripts/DockerBuild.sh && ./scripts/DockerRun.sh

Troubleshooting

The scripts/DockerRun.sh script includes several commented-out options that can help resolve common issues. Here's a breakdown of what they do:

  • xhost +local:docker: If you encounter an "Authorization required, but no authorization protocol specified" error, run this command in your terminal before executing scripts/DockerRun.sh. This grants Docker containers permission to interact with your X display server.
  • -h $HOSTNAME: Forces the container's hostname to match your workstation's hostname. This can be useful in certain network configurations.
  • -v /tmp/.X11-unix:/tmp/.X11-unix: Helps resolve problems with the X display by mounting the X11 Unix socket into the container.
  • --net=host: Uses the host's network stack, which is beneficial for printer Wi-Fi connectivity and D-Bus communication.
  • --ipc host: Addresses potential permission issues with X installations that prevent communication with shared memory sockets.
  • -u $USER: Runs the container as your workstation's username, helping to maintain consistent file permissions.
  • -v $HOME:/home/$USER: Mounts your home directory into the container, allowing you to easily load and save files.
  • -e DISPLAY=$DISPLAY: Passes your X display number to the container, enabling the graphical interface.
  • --privileged=true: Grants the container elevated privileges, which may be necessary for libGL and D-Bus functionalities.
  • -ti: Attaches a TTY to the container, enabling command-line interaction with OrcaSlicer.
  • --rm: Automatically removes the container once it exits, keeping your system clean.
  • orcaslicer $*: Passes any additional parameters from the scripts/DockerRun.sh script directly to the OrcaSlicer executable within the container.

By uncommenting and using these options as needed, you can often resolve issues related to display authorization, networking, and file permissions.

Linux Build

How to build OrcaSlicer on Linux.

Dependencies

The build system supports multiple Linux distributions including Ubuntu/Debian and Arch Linux. All required dependencies will be installed automatically by the provided shell script where possible, however you may need to manually install some dependencies.

Note

Fedora and other distributions are not currently supported, but you can try building manually by installing the required dependencies listed below.

Common dependencies across distributions

  • autoconf / automake
  • cmake
  • curl / libcurl4-openssl-dev
  • dbus-devel / libdbus-1-dev
  • eglexternalplatform-dev / eglexternalplatform-devel
  • extra-cmake-modules
  • file
  • gettext
  • git
  • gstreamer-devel / libgstreamerd-3-dev
  • gtk3-devel / libgtk-3-dev
  • libmspack-dev / libmspack-devel
  • libsecret-devel / libsecret-1-dev
  • libspnav-dev / libspnav-devel
  • libssl-dev / openssl-devel
  • libtool
  • libudev-dev
  • mesa-libGL-devel / libgl-dev
  • ninja-build
  • texinfo
  • webkit2gtk-devel / libwebkit2gtk-4.0-dev or libwebkit2gtk-4.1-dev
  • wget

Additional dependencies for specific distributions

  • Ubuntu 22.x/23.x: libfuse-dev, m4
  • Arch Linux: mesa, wayland-protocols

Linux Instructions

  1. Install system dependencies:

    ./build_linux.sh -u

  2. Build dependencies:

    ./build_linux.sh -d

  3. Build OrcaSlicer with tests:

    ./build_linux.sh -st

  4. Build AppImage (optional):

    ./build_linux.sh -i

  5. All-in-one build (recommended):

    ./build_linux.sh -dsti

Additional build options:

  • -b: Build in debug mode (mostly broken at runtime for a long time; avoid unless you want to be fixing failed assertions)
  • -c: Force a clean build
  • -C: Enable ANSI-colored compile output (GNU/Clang only)
  • -e: Build RelWithDebInfo (release + symbols)
  • -j N: Limit builds to N cores (useful for low-memory systems)
  • -1: Limit builds to one core
  • -l: Use Clang instead of GCC
  • -L: Use ld.lld as the linker (if available)
  • -p: Disable precompiled headers (boost ccache hit rate)
  • -r: Skip RAM and disk checks (for low-memory systems)

Custom compiler, flags and linker:

Everything after -- is passed unchanged to the cmake configure step of the dependencies (-d) and OrcaSlicer (-s, -t) builds, so any CMake variable can be set without editing the script:

./build_linux.sh -s -- -DCMAKE_CXX_FLAGS="-O2 -march=native"
./build_linux.sh -s -- -DCMAKE_C_COMPILER=gcc-14 -DCMAKE_CXX_COMPILER=g++-14
./build_linux.sh -s -- -DCMAKE_EXE_LINKER_FLAGS=-fuse-ld=mold -DCMAKE_SHARED_LINKER_FLAGS=-fuse-ld=mold
./build_linux.sh -g -st -- -DSLIC3R_PCH=OFF

These arguments come last on the cmake command line, so they override what -l and -L set. They also work with -g, which forwards them into the container. Pass them to the invocation that configures the build you want to change: the dependencies in a -d run, OrcaSlicer in a -s or -t run.

The DEPS_EXTRA_BUILD_ARGS and ORCA_EXTRA_BUILD_ARGS environment variables add whitespace-separated configure arguments to the dependencies and OrcaSlicer builds respectively. They cannot carry an argument that contains a space and are not forwarded into the -g container, so prefer --.

Note

CMake only reads compiler and flag settings when it configures a build directory for the first time. To change them on an existing build, pass -c for a clean build or edit build/CMakeCache.txt.

Note

The build script automatically detects your Linux distribution and uses the appropriate package manager (apt, pacman) to install dependencies.

Tip

For first-time builds, use ./build_linux.sh -u to install dependencies, then ./build_linux.sh -dsti to build everything.

Tip

Some changes are not picked up by a normal rebuild because they live in the prebuilt dependencies (deps/), not in the OrcaSlicer sources. In that case rebuild the affected dependency target instead of the whole deps/ tree.

For example, after modifying wxInspector:

cd ~/OrcaSlicer   # the repository root, where build_linux.sh lives
cmake --build deps/build --target dep_wxInspector
./build_linux.sh -s

The path is relative, so running it from anywhere else fails with .../deps/build is not a directory.

No --config flag is needed here: the dependencies are configured with a single-config generator, so the build type is fixed when they are configured. Use deps/build-dbg for debug builds (-b) and deps/build-dbginfo for RelWithDebInfo builds (-e).

Warning

If you encounter memory issues during compilation, use -j 1 or -1 to limit parallel compilation and -r to skip memory checks.

⚠️ **GitHub.com Fallback** ⚠️