Lab 1 1 - ModeJeffrey/NET150 GitHub Wiki

Jeffrey Modesitt Setting up a Windows 10 VM

Part 1: How to change a VM adapter from NAT to Bridged: Using the VM prompt on the settings of your virtual machine, select the “Network Adapter” setting and change the network from NAT to Bridged How to Turn Windows Firewall Off: Search “Firewall” within the Windows search bar and click on the Firewall settings. Click on the option to enable or disable the firewall and click on the disable prompt.

IPv4 Address: 192.168.3.136 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.3.250

Physical Address: 00-0c-29-3f-31-54 DNS Servers: 192.168.4.5

These results are different from pinging Google due to the low numbers of minimum and maximum ms in personal IP addresses as opposed to public websites such as Google. I guess this is to be expected though, as Google has many different servers while we only have access to one.

Part 2

There were over 30 hops between me and Google.

Actual Name: yahoo.com There are 12 IP addresses for yahoo.com

Actual Name: www.champlain.edu There is one IP address for www.champlain.edu

Reflections: I had a lot of trouble with this assignment at first, as I had never worked with a virtual machine before, or have any experience with networking. But over time, and with the help of my fellow students and instructor, I was able to figure it all out. This lab taught me how to use basic commands such as ipconfig, tracert, and nslookup, as well as disable the Windows firewall.