PCB front panel - Micha213/BlueRetro-PS1-2-Receiver GitHub Wiki

The front panel of the case is part of the circuit board. It needs to be cut off from the circuit board at the three dedicated connection points. The circuit board is very easy to cut through with a straight grinder (e.g. a Dremel) and a cut-off wheel.

After that, the remaining residues of the connections must be grinded away straight and clean. This can be done with a sandpaper or even better with the Dremel and a sanding attachment. It is not critical for the actual circuit board, but the front panel should be worked very cleanly and precisely so that it fits well into the case at the end.