- Supported Platforms
- Supported Firmware
- Supported Cables
- New Features
- Known Issues
| Product |
Description |
| Mellanox SpectrumTM Ethernet Switch ASIC |
SpectrumTM, 32 Port 100GbE switch IC |
| Mellanox SN2700 |
SpectrumTM based 100GbE 1U Open Ethernet Switch with, 32 QSFP28 ports |
| Mellanox SN2410 |
SpectrumTM based 25GbE/100GbE 1U Open Ethernet Switch, 48 SFP28 ports, 8 QSFP28 ports |
| Mellanox SN2100 |
SpectrumTM based 100GbE 1U Open Ethernet switch, 16 QSFP28 ports |
mlxsw_spectrum-13.1302.0120.mfa
For a list of the Mellanox supported cables please visit the
LinkXTM Cables and Transceivers page.
| Kernel |
Category |
Description |
| 4.12 |
ACL Keys |
VLAN-ID, PCP, DCSP support |
|
ACL Infrastructure |
Added counters support |
|
L3 Routing |
Enabled 256 VRFs |
|
Visibility |
Added RIF counters |
| 4.11 |
ACL Infra |
Added 'tc-flower' offloading for ACLs |
|
ACL Keys |
Port, DMAC, SMAC, Ethertype, IP proto, SIP DIP (IPv4/6), TCP/UDP, L4 port |
|
ACL Actions |
DROP, Forward |
|
IP Multicast |
IGMP flooding enhancements |
|
Visibility |
sFlow |
| 4.10 |
QoS |
CPU policers support |
| 4.9 |
L3 routing |
L3 router performance enhancements |
|
Chassis management |
I2C driver added for Mellanox SpectrumTM switch systems |
| 4.8 |
L3 routing |
Unicast IPv4 |
|
|
ECMP support |
|
Visibility |
SPAN support |
| 4.7 |
QoS |
Shared buffer configurations using devlink
|
|
|
DCB and port QoS mapping |
| 4.6 |
Port configuration |
devlink support for Port-splitter |
| 4.5 |
L2 switching |
Bridges and flooding control |
|
|
FDB, FDB learning and ageing time |
|
|
802.1Q bridges and PVID |
|
|
802.1D bridges |
|
|
Bond offload |
|
|
Team offload |
|
|
STP |
|
|
LLDP |
|
|
IGMP snooping |
| 4.4 |
Port configuration |
Switch ports representation as net devices |
|
|
Switch ports configuration (IP address, MTU, admin-status, operation status) |
|
|
ethtool support for query port counters, read firmware version, toggle port indicator LEDs |
|
|
VLAN filtering configuration for switch ports |
|
Chassis management |
hwmon implementation of the switch ASIC for temperature and fans |
| Category |
Description |
| Network configuration |
Order of operations: Network configuration should be done bottom-up, teardown should be done top-down |
| ACL |
ACL key size: Rules that match on L2 fields and the complete IPv6 header cannot be specified |
| L3 routing |
ECMP size: The current supported ECMP size is 32 next hops |